Lenz Digital Plus LH101 Mode D'emploi page 13

Fast clock
1 Fast clock
Many model railroaders as well as clubs and associations like to
arrange their operation according to a timetable. Especially at module
meetings this way of making "operation" together is very popular.
Since the distances on a model railway are usually more or less
shortened, a faster running clock is needed for the timetable operation.
The new LZV200 has an integrated fast clock whose speed can be
adjusted over a wide range.
1.1 Setting the fast clock
You can set the day of the week, the hours and minutes, and the time
factor.
If the time factor = 0, the time is off, factor 1 is "normal" speed, factor 2
is double speed etc. up to factor 31.
The fast clock only runs while your LZV200 is in operation. If the
LZV200 is switched off, the fast clock is also stopped. The last model
time remains stored in the LZV200.
If the fast clock was active while the LZV200 was switched off, it is
automatically restarted when the LZV200 is switched on again.
Action Display
The starting point is locomotive control ...
... switch to the general menu.
Turn the knob until the "Setup System" option
is displayed.
... and confirm by pressing the rotary knob.
If necessary, turn the rotary knob until the
"clock setting" option is visible.
Press the rotary knob to select the option.
Explanation
13
E