Installing A Three-Wire Connection; Installing A Four-Wire Connection; Installing The Appliance - Gaggenau BS 470 612 Instructions D'installation

en-us Installing the appliance
7.3 Installing a three-wire connection
To facilitate serviceability and to ensure the safety of
1.
the installation, the flexible conduit must not be short-
ened and should be routed to allow for temporary re-
moval of the oven.
1
2
3
4
3
5
Cable from home power supply
1
Red wires
2
Green or bare wire from home power supply
3
Green ground wire from oven
4
3-wire flexible conduit from oven
5
UL listed or CSA approved junction box
6
Black wires
7
UL listed or CSA approved conduit connector
8
Connect the red wire from the oven to the red electrical
2.
supply wire (hot wire).
Connect the black wire from the oven to the black elec-
3.
trical supply wire (hot wire).
Connect the green ground wire from the oven to the
4.
green or bare ground electrical supply wire.
7.4 Installing a four-wire connection
Ungrounded Neutral
IMPORTANT: Use the four-wire cable from home power
1.
supply in the U.S. where local codes do not allow
grounding through neutral, New Branch circuit installa-
tions (1996 NEC), mobile homes and recreational vehi-
cles, new construction and in Canada.
8
To facilitate serviceability and to ensure the safety of
2.
the installation, the flexible conduit must not be short-
ened and should be routed to allow for temporary re-
moval of the oven.
1
2
6
3
7
4
5
Cable from home power supply
1
Red wires
2
8
Green or bare wire from home power supply
3
Green ground wire from oven
4
3-wire flexible conduit from oven
5
UL listed or CSA approved junction box
6
Black wires
7
White wire
8
UL listed or CSA approved conduit connector
9
Connect the red wire from the oven to the red electrical
3.
supply wire (hot wire).
Connect the black wire from the oven to the black elec-
4.
trical supply wire (hot wire).
Connect the green ground wire from the oven to the
5.
green or bare ground electrical supply wire.
8 Installing the appliance

Installing the appliance

Follow these instructions to install your appliance in the
Installing the appliance
cabinet.
8.1 Installing the appliance in a tall cabinet
Remove the transport brackets for the inlet and drain
1.
hose.
When installing 2 appliances next to each other, align
2.
both handles to the center.
6
7
8
9