Kemper 83 200 110 Mode D'emploi page 94

3. Disconnect the product from the compressed air network and allow any
stored compressed air to escape from the system.
4. Make sure the original replacement filter cartridges and the enclosed
disposal bag are available.
Fig. 45: Filter replacement – maintenance cover access
Item Description
3 Silencer
Tab. 30: Filter replacement – maintenance cover access
5. Remove the two screws of the swivel wall mount bracket according to
the illustration so that the product is only fixed to the wall mount
bracket on one side.
1502518-00
Item Description
4 Swivel wall mount bracket
- 94 -
EN