Technical Data (3.17) - lifter PX20 Manuel D'utilisation Et D'entretien

Masquer les pouces

Table des Matières

Les langues disponibles

MODELL

CAPACITY

LOAD CENTRE

CONTROL SYSTEM

ELEVATION

LENGHT

DIMENSIONS

TURNING CIRCLE

STACKING LANE

UNLOADAED WEIGHT

LOAD ON AXLES

WHEELS

TYRES

WHEELBASE

BATTERY

DISPLAY

SPECIFICATIONS

*G=Rubber, P=Polyuretane

TRANSLATION OF THE ORIGINAL INSTRUCTIONS - INTRODUCTION (2.3)

This manual contains all the instructions for use and all information necessary for the correct operation of the machine.

In thanking you for having chosen to purchase this transpallet we would like to draw your attention to the following points

regarding this manual:

- this booklet provides all indications necessary for the correct functioning and maintenance of the transpallet to which it

refers; it is therefore essential that care is taken in reading all the paragraphs which illustrate the simple and safe way of

operating this machine;

- this booklet is to be considered as an integral part of the machine and must be included at the moment of purchasing;

- neither this publication, nor any part thereof may be reproduced without written authorization by the Manufacturer;

- all the information contained herein is based on data available at the moment of going to print; the Manufacturer reserves

all rights to carry out any modifications to its products at any given moment, without advance notice and without incurring

any penalties.

The person in charge of the trolley operation must make sure that all the safety regulations in force in the country

of use are applied, and guarantee that the device is used in compliance with the use for which it is designed thus

avoiding all hazardous situations for the user.

The Manufacturer declines all responsibility for any errors in weighing.