Dalla Corte Evolution Notice Pour L'utilisateur page 34

TEMPERATURE PROBE GROUP 1
Group 1 lockup, LED # 6 of group
1 blinks and machine gives out 3
beeps. To cancel the alarm turn
the main switch of the machine
off and back on. This alarm is
triggered when the electronic
board senses that the readin-
gs of the temperature probe in
group 1 are out of range.
TEMPERATURE PROBE GROUP 2
Group 2 lockup, LED # 6 of group
2 blinks and machine gives out 3
beeps. To cancel the alarm turn
the main switch of the machine
off and back on. This alarm is
triggered when the electronic
board senses that the readin-
gs of the temperature probe in
group 2 are out of range.
TEMPERATURE PROBE GROUP 3
Group 3 lockup, LED # 6 of group
3 blinks and machine gives out 3
beeps. To cancel the alarm turn
the main switch of the machine
off and back on. This alarm is
triggered when the electronic
board senses that the readin-
gs of the temperature probe in
group 3 are out of range.
34
TEMPERATURE PROBE GROUP 4
Group 4 lockup, LED # 6 of group
4 blinks and machine gives out 3
beeps. To cancel the alarm turn
the main switch of the machine
off and back on. This alarm is
triggered when the electronic
board senses that the readin-
gs of the temperature probe in
group 4 are out of range.
FLOWMETER GROUP 1
LED of dispensing button being
used blinks. To stop dispensing,
press button P3 of group 1.
To cancel the alarm turn the
main switch of the machine off
and back on. This alarm is trig-
gered when the electronic bo-
ard cannot receive any readings
from flowmeter of group 1 du-
ring coffee dispensing.
FLOWMETER GROUP 2
LED of dispensing button being
used blinks. To stop dispensing,
press button P3 of group 2.
To cancel the alarm turn the
main switch of the machine off
and back on. This alarm is trig-
gered when the electronic bo-
ard cannot receive any readings
from flowmeter of group 2 du-
ring coffee dispensing.