Epa Compliance; Iso Compliance; Ce Compliance; Ip67 Compliance - LaMotte 2020t/i Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

 EPA COMPLIANCE
The 2020t meter meets or exceeds EPA design specifi cations for NPDWR and NPDES
turbidity monitoring programs as specifi ed by the USEPA method 180.1.
 ISO COMPLIANCE
This 2020i meter meets or exceeds ISO design criteria for quantitative methods of turbidity
using optical turbidimeters as specifi ed by ISO 7027.
 CE COMPLIANCE
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interferences in which case the user will be required to
correct the interference at his own expense.
 IP67 COMPLIANCE
The 2020t/i meets IP67 standards for protection against dust and immersion only when
the USB port plug is in place. Documentation is available at www.lamotte.com.
 WARRANTY
LaMotte Company warrants this instrument to be free of defects in parts and workmanship
for 2 years from the date of shipment. If it should become necessary to return the
instrument for service during or beyond the warranty period, contact our Technical
Service Department at 1-800-344-3100 for a return authorization number or visit
www.lamotte.com for troubleshooting help. The sender is responsible for shipping
charges, freight, insurance and proper packaging to prevent damage in transit. This
warranty does not apply to defects resulting from action of the user such as misuse,
improper wiring, operation outside of specifi cation, improper maintenance or repair, or
unauthorized modifi cation. LaMotte Company specifi cally disclaims any implied warranties
or merchantability or fi tness for a specifi c purpose and will not be liable for any direct,
indirect, incidental or consequential damages. LaMotte Company's total liability is limited
to repair or replacement of the product. The warranty set forth above is inclusive and no
other warranty, whether written or oral, is expressed or implied.
 REGISTER YOUR METER
To register your meter with the LaMotte Service Department, go to www.lamotte.com and
choose SUPPORT on the top navigation bar.

COMPUTER CONNECTION

 OUTPUT
USB
8

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1974-t1974-i

Table des Matières