Pc Link; Data Logging - LaMotte 2020t/i Mode D'emploi

6. Press
desired language.
ENTER
7. Press
language. The screen will
momentarily display, Storing...for
about 1 second and return to the
Options Menu.
NOTE: If the meter unintentionally switches to another language, use the procedure above
to reset the meter to the desired language. For example, to reset the meter to English:
1. Turn the meter on.
2. Press down arrow twice. Press
3. Press down arrow six times. Press
ENTER
4. Press .
 PC LINK
Run PC Link is used in the manufacturing of the meter. This menu is not for use by the
operator in the fi eld.

DATA LOGGING

The default setting for the data logger is enabled. The meter will log the last 500 data
points. The counter in the center bottom of the display will show how many data points
have been logged. The display will show 500+ when the data logger has exceeded 500
points and the data points are being overwritten.
1. Press and briefl y hold
turn the meter on. The LaMotte
logo screen will appear for about
3 seconds and the Main Menu will
appear.
or to scroll to
to select desired
ENTER
to
English
Spanish
French
Portuguese
12:00:00
Set Clock
Set PWR Save
Set Backlight Time
Select Language
12:00:00
.
ENTER
.
Measure
Data Logging
Options
12:00:00
25
Select Language
001/500
Options Menu
001/500
Main Menu
001/500