Setting Backlight Time - LaMotte 2020t/i Mode D'emploi

11. Press
desired setting.
ENTER
12. Press
The screen will display Storing... for
about 1 second and return to the
Options Menu.
 SETTING THE BACKLIGHT TIME
The backlight illuminates the display for enhanced viewing. If Button Control is chosen the
backlight button on the key pad will act as an on/off switch and the backlight will remain on
or off when the meter is being used. When one of the other settings – 10, 20 or 30 seconds
– is chosen, the display will be illuminated for the specifi ed amount of time after any button
is pressed. As a precaution, the backlight will not illuminate during turbidity measurements
to avoid interference from stray light.
NOTE: The backlight feature uses a signifi cant amount of power. The longer the backlight is
on, the more frequently the battery will have to be charged if the USB/Wall Charger is not
being used.
1. Press and briefl y hold
turn the meter on. The LaMotte
logo screen will appear for about
3 seconds and the Main Menu will
appear.
2. Press
or to scroll to
to save the selection.
to
to scroll to Options.
Auto Shutoff
Disable
5 Minutes
15 Minutes
30 Minutes
12:00:00
Options Menu
Turbidity Options
Averaging
Set Clock
Set PWR Save
12:00:00
Main Menu
Measure
Data Logging
Options
12:00:00
Main Menu
Measure
Data Logging
Options
12:00:00
22
001/500
001/500
001/500
001/500