LaMotte 2020t/i Mode D'emploi page 28

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Mode
Nephelometric (N)
Ranges
0-11 NTU/FNU
10-110 NTU/FNU
Each range can be calibrated with one point per range plus a blank. New calibration points
will replace old calibration points independently for each range. If one range is recalibrated,
the meter will retain the old calibration data for the other ranges. It is recommended that
the meter be calibrated for each range that will be used. The value of the standards chosen
for the calibration should not be at the extremes of the ranges. The meter is auto-ranging
and will automatically select the appropriate range for the sample being tested.
It is recommended that the meter be calibrated daily.
A 2020t in the nephelometric mode with NTU standards will be used in the following
examples.
1.
Press and briefl y hold
turn the meter on. The LaMotte
logo screen will appear for about
3 seconds and the Main Menu will
appear.
ENTER
2.
Press
3.
Press
With Blank.
ENTER
4.
Press
With Blank.
Ratiometric (R)
0-11 NTRU/FNRU
10-110 NTRU/FNRU
100-510 NTRU/FNRU
500-1000 NTRU/FNRU
to
to select Measure.
to scroll to Turbidity -
to select Turbidity -
Main Menu
Measure
Data Logging
Options
12:00:00
Measure Menu (N)
Turbidity - No Blank
Turbidity - With Blank
12:00:00
Measure Menu (N)
Turbidity - No Blank
Turbidity - With Blank
12:00:00
Turbidity WB (N)
Scan Blank
Scan Sample
12:00:00
28
Attenuation (A)
0-1010 AU/FAU
1000-2000 AU/FAU
001/500
001/500
001/500
001/500

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1974-t1974-i

Table des Matières