Scope Of Supply - VOLTCRAFT IR 1000-30D Notice D'emploi

Features
Dual targeting laser with focal point
Integrated alarm function with high and low alarm values and visual as well as acoustic signalling.
Saves maximum, minimum, and average temperatures as well as temperature differences during mea-
surements
Continuous measurement function
Emissivity adjustable from 0.10 to 1.00
Additional temperature measurement via type K contact sensor
Backlight for the display can be switched on
Can store up to 100 measured values (only IR 1200-50D USB and IR 1600-50D USB)
Transmission of temperature measurement values to a computer via the USB interface (only IR 1200-
50D USB and IR 1600-50D USB)

Scope of Supply

Infrared thermometer
Storing case
9V block battery
K-type wire sensor
Operating instructions
USB interface cable (only IR 1200-50D USB and IR 1600-50D USB)
Software CD (only IR 1200-50D USB and IR 1600-50D USB)
The warranty will be void if damage is incurred resulting from non-compliance with
these operating instructions! We do not assume any liability for consequential dam-
age and for damage to property and injury to persons caused by unprofessional use
or non-compliance with the safety instructions! The exclamation mark indicates
important notes in these operating instructions that should strictly be observed.
The unauthorized conversion and/or modification of the product is inadmissible for safety and approval
reasons (CE).
The device must not be subjected to heavy mechanical stress or strong vibrations.
The device must not be exposed to electromagnetic fields, extreme temperatures, direct sunlight or
moisture.
The device must not be exposed to high humidity or fluids. When used outdoors, the device may only be
used in appropriate weather conditions or with proper protection.
All manuals and user guides at all-guides.com
19