VOLTCRAFT IR 1000-30D Notice D'emploi page 20

All manuals and user guides at all-guides.com
Steam, dust, smoke and/or vapours can impair the optical characteristics of the thermometer and lead to
false measuring results.
Laser radiation can be dangerous, if the laser beam or its reflection enters unprotected eyes. Therefore,
before using the laser equipment, familiarise yourself with the statutory regulations and instructions for
operating such a laser device.
Never look into the laser beam and never point it at people or animals. Laser radiation may result in inju-
ries to the eyes or skin.
Do not point the laser beam at mirrors or other reflective surfaces. The uncontrolled, reflected beam may
strike people or animals.
Never leave the laser in operation unattended.
If possible, restrict the range of radiation by using screens or partitions.
Wherever possible, direct the laser in such a way that it does not cross eye level.
Caution: if operation settings or procedures others than those described here in these instructions
are used, it could result in exposure to dangerous radiation.
The product is equipped with a class 2 laser. Laser signs in different languages are included in the
package. If the sign on the laser is not written in the language of your country, please affix the appro-
priate sign onto the laser.
Never look into the laser beam directly or with optical instruments.
The device should not be operated immediately after it has been taken from a cold to a warm environ-
ment. Condensation may destroy the device. If the lens is steamed up, measured results can be faulty.
Allow the product to adapt to the ambient temperature before using it.
If you have any reason to believe that safe operation is no longer possible, switch off the device and
secure it against inadvertent operation. Reasons to assume that safe operation is no longer possible are
the following:
- the product shows visible damage,
- the device no longer functions, or
- the product was stored under unfavourable conditions for an extended period of time,
- the product was exposed to heavy stress during transport.
20