.UK.
Installation and configuration
The following tools are required to install the expansion module:
1 screwdriver 2mm
1 Phillips screwdriver
1 insulating pliers
1 side-cutting nipper
Safety information
The mains plugs of all components and units connected to the
System should be extracted before working on the opened
Telephone System. Removing and fitting expansion modules
while the System is running can cause serious damage to or
destruction of the Telephone System and the expansion
module.
Installation
Please observe the following instructions when installing a new ex-
pansion module:
Preparatory work
The following work must be carried out before installing the
expansion module:
·
Only remove the module from its transport packaging
immediately before installation. Do not touch any
component parts and hold the board only at the edges.
·
Avoid strong static charges before installation (e.g. touch an
earthed radiator).
Expansion module tiptel 2S0
13
.UK.