TIPTEL 2S0 Instructions D'installation page 11

.UK. Expansion module tiptel 2S0 .UK.
Preface
This user guide describes the installation and configuration of the
expansion module tiptel 2S0. For proposals regarding your S0 bus
(e. g. short passive bus or extended passive bus), please refer to
the user manual of your telephone system tiptel 4011 XT.
Explanations of the technical terms used can be found in the sup-
plement of the user manual for the telephone system tiptel 4011 XT.
This expansion module has exclusively been developed for an
installation in the ISDN telephone system tiptel 4011 XT. Its use
in other telephone systems may lead to a destruction of the
module or of the entire system.
Only terminal units disposing of a valid approval shall be con-
nected to this expansion module.
We reserve the right to modify the User Manual or the hardware
described at any time and without prior notice. The texts and
illustrations contained in this User Manual have been compiled with
the utmost care, though errors cannot be ruled out completely. The
publisher shall not be held liable for any incorrect information or
consequences arising from the same.
© 2001 TIPTEL AG Ratingen. All rights reserved.
11