EINHELL NEW GENERATION NKT 1200 Mode D'emploi page 24

Anleitung NKT 1200_SPK1:_
GB
1. Layout and items supplied
(Figures 1 – 2)
1. Dust bag
2. Saw bench
3. Angle adjustment lever
4. Saw blade
5. ON/OFF switch
6. Folding bottom frame
7. Wrench
8. 4x Allen keys
For use as a bench circular saw
9. Push stick
10. Angle stop
11. Saw blade guard
12. Splitter
13. Knurled screw for cutting height
14. Parallel stop
For use as a crosscut and miter saw
15. Saw blade guard
16. Handle
17. Machine head
18. Stop rails
19. Turntable
20. Chip box
2. Proper use
The bench, crosscut and miter saw is designed in
bench circular saw mode for the slitting and cross-
cutting (only with the cross stop) of all types of timber,
commensurate with the machine's size. The machine
is not to be used for cutting any type of round wood.
In crosscut and miter saw mode it is designed for
cross-cutting wood and plastic, commensurate with
the machine's size. The saw is not designed for
cutting firewood. The machine is to be used only for
its prescribed purpose.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
3. Safety Information
Please refer to the booklet included in delivery for the
safety instructions.
24
28.03.2007 11:55 Uhr Seite 24
4. Noise emission values
The sawʼs noise is measured in accordance with
DIN EN ISO 3744; 11/95, E Din EN 31201; 6/93,
ISO 7960 Annex A; 2/95. The machine may exceed
85 dB(A) at the workplace. In this case, noise
protection measures need to be introduced for the
user (ear-muffs).
Sound pressure level L
Sound power level L
„The quoted values are emission values and not
necessarily reliable workplace values. Although there
is a correlation between emission and immission
levels it is impossible to draw any certain conclusions
as to the need for additional precautions. Factors
with a potential influence on the actual immision level
at the workplace include the duration of impact, the
type of room, and other sources of noise etc., e.g.
the number of machines and other neighbouring
operations. Reliable workplace values may also vary
from country to country. With this information the
user should at least be able to make a better
assessment of the dangers and risks involved."
5. Technical data
AC motor
Rating
Operating mode
Idle speed n
Carbide saw blade
Number of teeth
Weight
Dust extraction connector
For use as a crosscut and miter saw
Swiveling range
Miter cut
Saw width at 90°
Saw width at 45° (turntable)
Saw width at 45° (angle)
Saw width at 2 x 45° (double miter cut) 42 x 125 mm
87,6 dB(A)
pA
100,6 dB(A)
WA
230 V ~ 50 Hz
3200 rpm
0
Ø 205 x Ø 30 x 2.5 mm
Ø 36 mm
Up to 45° to the left
+45° / 0° / -45°
55 x 180 mm
55 x 125 mm
42 x 180 mm
Idling
1200 W
S6 40 %
24
36 kg