Preliminary Controls - SWM SIX DAYS 2018 Guide Rapide

PRELIMINARY CONTROLS

A. Engine-transmission oil level
Note*: Check the oil level when the engine has just
been turned off and is still hot.
- Position the motorcycle on a flat surface in vertical
position.
- Remove the RH side panel as described in the rela-
tive paragraph.
- Unscrew the dipstick (1) and remove it; clean it
with a cloth and reinsert it in the filling hole (2)
without screwing it back in, then remove it again
and check that the oil level is between the "MIN"
and "MAX" notches.
- If you need to top up, pour in oil through the hole
(2) until reaching the correct level.
- Reinsert the dipstick and screw it back into place.
1
MAX
MIN
2
1
B. Fuel level
Check the level in the tank, top up as needed.
EN - 7