Copying - Olivetti d-Copia 300MF Guide De L'utilisateur

Copying

OPERATION GUIDE
Follow the steps as below for basic copying.
1 Press the Copy key when the
Copy key/indicator is off.
NOTE:
If you place the original and press the Start key before the copier
has warmed up, only the scanning is performed in advance and the
copying job starts upon completion of the warm-up.
2
Place the originals on the
platen or in the optional
document processor.
NOTE:
For loading instructions, refer to Loading Originals on page 2-25.
3
Check that [Auto] is selected of Paper Selection on the touch panel. Paper
that matches the size of the original will be selected automatically.
To change the paper
size, press [Paper
Selection] and
select desired paper
source.
NOTE:
Select paper size manually, if necessary, instead of using
automatic paper selection.
Ready to copy.
Copy Image
Set Original.
Auto
Zoom
Original
Zoom
1-sided Text+Photo
Paper
>>1-sided
Duplex
Quick Setup Org./Paper/
Finishing Quality
Status
Basic Operation
Copies
Normal 0 A4
Plain
Density Paper
Selection
Collate
Original Collate/
Image Offset
Image Layout/Edit Advanced
Setup
10/5/2006
1
10:10
3-7