Olivetti d-Copia 300MF Guide De L'utilisateur page 157

Error Message
Cannot connect to
Authentication
Server.
Cannot duplex print
this paper type.
Cannot execute this
job.
Cannot offset this
paper type.
Cannot punch this
paper type.
Cannot staple this
paper type.
Check the cover.
Check the document
processor.
Check the finisher.
Clean the slit glass.
OPERATION GUIDE
Checkpoints
–
Did you select a paper size/
type that cannot be duplex
printed?
–
Did you select a paper size
(A3, B4, A5-R, B6-R, Folio,
Ledger, Statement and 8K)
that cannot be offset?
Did you select a paper size/
type that cannot be
punched?
Did you select a paper size/
type that cannot be stapled?
Is there any cover which is
open?
Is the document processor
open?
Is the top cover of the
document processor open?
Is the built-in finisher or the
document finisher set
correctly?
Is the built-in finisher tray set
correctly?
–
Corrective Actions
Press [End] and check the
following items:
• Registration to Authentication
Serve
• Password and computer
address for Authentication
Server
• Connection of Network
Select the available paper size/
type.
Press [Continue] to print without
using Duplex.
This job is canceled because it is
restricted by Job Accounting.
Press [End].
Select the available paper size.
Press [Continue] to print without
using Offset.
Select the available paper size/
type.
Press [Continue] to print without
using Punch.
Select the available paper size/
type.
Press [Continue] to print without
using Staple.
Close the cover indicated on the
touch panel.
Close the document processor.
Close the top cover of the
document processor.
Set the built-in finisher or the
document finisher correctly. For
details, refer to the respective
Operation Guides.
Set the built-in finisher tray
correctly.
Clean the slit glass using the
attached cleaning cloth.
Troubleshooting
Reference
Page
—
3-13
—
3-16
—
—
—
—
6-21
—
—
5-3
6-5