Olivetti d-Copia 300MF Guide De L'utilisateur page 174

Troubleshooting
Optional Document Finisher
6-22
If it is difficult to remove the
original, turn the feed dial. The
original will be pushed to a
place where it is easier to
remove.
4
Lift reverse unit.
5
Remove the jammed original.
If the original tears, remove every loose scrap from inside the machine.
6
Replace reverse unit, and close the document processor top cover.
7 Reload the originals on the document processor tray.
If a misfeed occurs in the optional document finisher or 3,000-sheet
capacity document finisher, refer to the respective Operation Guides to
clear the jam.
OPERATION GUIDE