Responding To Error Messages - Olivetti d-Copia 300MF Guide De L'utilisateur

Troubleshooting

Responding to Error Messages

Alphanumeric
Error Message
Acceptable staple
count exceeded.
Add paper in cassette
#.
Add paper in MP tray.
Add staples.
Add toner.
An error has
occurred.
Box limit exceeded.
6-4
If the touch panel displays any of these messages, follow the
corresponding procedure.
Checkpoints
Is the acceptable staple
count exceeded? For details,
refer to Specifications on
page Appendix-6.
Is the indicated cassette out
of paper?
Is the paper of the selected
size loaded in the Multi
Purpose Tray?
Has any of the built-in
finisher, center binding
finisher, document finisher or
3,000-sheet capacity
document finisher run out of
staples?
–
–
–
–
Corrective Actions
Press [Continue] to print without
using Staple.
Press [Cancel] to cancel the job.
Load paper.
Load the paper in the Multi
Purpose Tray which is of the size
and type indicated on the touch
panel.
If the staples are depleted, the
machine will stop and the location
of staple depletion will be indicated
on the touch panel.
Leave the machine on and follow
the instruction to replace the staple
case. Press [Continue] to print
without using Staple.
Press [Cancel] to cancel the job.
Replace the toner container.
Internal error has occurred.
Turn the main power switch off and
on.
If error occurs repeatedly, make a
note of the error code displayed on
the touch panel, and contact your
Service Representative.
Document box is full, and no
further storage is available. This
job is canceled. Press [End].
Repeat Copy box is full, and no
further repeat copy is available.
Press [Continue] to print without
using Repeat Copy.
Press [Cancel] to cancel the job.
Reference
Page
—
2-15
2-18
4-6
5-7
—
—
—
OPERATION GUIDE