Olivetti d-Copia 300MF Guide De L'utilisateur page 65

Loading Originals in the Document Processor
OPERATION GUIDE
The optional document processor automatically scans each sheet of
multiple originals. Both sides of two-sided originals are scanned.
Part Names of Document Processor
(1) Original table
(2) Original width guides
(3) Opening handle
(4) Original eject table
(5) Top cover
(6) Original placement indicator
Originals Supported by the Document Processor
The document processor supports the following types of originals.
Weight 45 g/m
Size Maximum A3 to Minimum A5-R
Maximum Ledger to Minimum Statement-R
Capacity Plain paper (80 g/m
Colored paper, Recycled paper: 100 sheets (Mixed sized
originals: 30 sheets)
Thick paper (120 g/m
Thick paper (160 g/m
Art paper, Rough paper, Coated paper: 1 sheet
High quality paper (110 g/m
Originals Not Supported by the Document Processor
Do not use the document processor for the following types of originals.
• Soft originals such as vinyl sheets
• Transparencies such as OHP film
• Carbon paper
• Originals with very slippery surfaces
• Originals with adhesive tape or glue
• Wet originals
(6)
(3)
2 2
to 160 g/m
2
), High quality paper (50 g/m
2
): 66 sheets
2
): 50 sheets
2
): 73 sheets
Preparation before Use
(5) (2) (1) (4)
2
),
2-27