Olivetti d-Copia 300MF Guide De L'utilisateur page 92

Basic Operation
3-24
Item
Login User User name to access the PC
Name
Login Password to access the PC
Password
* Specify the port number different from the default (139) using the
format of Host Name: Port No.
6 Upon completion of
all entries, press
[Connection Test] to
check the
connection.
NOTE:
Connected appears when connection to the destination is
correctly established. If Cannot connect appears, review the entry.
To specify another destination, go to the next step. To specify only one
destination, go to the step 8.
7 Press [Next Dest.] and repeat the steps 4 to 6 to specify the destination.
Up to 10 folders can be specified.
NOTE:
When [Add to Addr Book] is displayed, the entry is registered in
the address book.
8
Press [OK] to register the entry in the destination list.
9
Check the destination list.
Select a destination and press [Detail/Edit] to check and edit it. Edit it, if
necessary, referring to the steps 5 to 7.
Data to be entered
Ready to send.
Place original.
Folder Path Entry
Host Name
SMB
Path
FTP
Login
User Name
Login
Password
Add to Addr Book Next Dest.
Status
Max.
characters
Up to 62
characters
Up to 62
characters
Destination
1
Connection
Test
Cancel OK
10/5/2006 10:10
OPERATION GUIDE