JANE IKONIC Mode D'emploi page 26

Your new IKONIC from Jané is a safety seat designed to protect
the baby in the car. This product is suitable for children of up to
18 kg, with a height of between 40 and 105 cm.
This is an "i-Size" child restraint system. It has been approved
under Regulation 129/00, for general use in vehicles fitted with
the "i-Size" system.
It can be used in vehicles with "i-Size" authorised seats (check
the details in the vehicle instruction manual) and vehicles
compatible with the class B1 or D ISOfix category (see the
EN
compatibility list on the website: www.jane.es).
If in doubt, consult your distributor, or check the website:
www.jane.es.
It is very important that you read these instructions carefully
before using the IKONIC safety seat for the first time. Make sure
that everyone who is going to use it at any time is also familiar
with the instructions for correct installation and use. It has been
shown that a significant percentage of safety seat users do not
install their seats correctly; understanding and following the
instruction manuals correctly is as important for safety as the
actual seat itself.
Keep the instructions in the compartment underneath the
seat, and consult them if you have any doubts. You can also
find the instructions on our web page: www.jane.es. You will also
find a QR code, on a label on the side of the upholstery, with a
demonstration video.
26
IM 2046_02_IKONIC alta.indd 26 10/7/18 10:20