Storage; Changing The Needle - DS Produkte Z 07283 Mode D'emploi

EN

Storage

• Store small sewing accessories in the drawer (19) on the back of the sewing machine.
• Place a piece of fabric under the presser foot and then lower it.
• Disconnect the mains adapter from the mains and then from the device. Pull the plug
for the foot control out of the device.
• Store the device and accessories in the original packaging out of the reach of children
and animals in a dry place at temperatures of between 0 and 40°C.

Changing the Needle

Sewing machine needles are available in different sizes. Small needles are suitable for
fi ne / delicate fabrics and large needles for heavy fabrics. The needles which are supplied
with the device are suitable for average fabric strengths. If you want to sew a particularly
tough or fi ne fabric, you should purchase a suitable sewing machine needle and use it.
The needle must always be straight and sharp to ensure trouble-free sewing. Replace
the needle if it is bent, blunt or broken.
CAUTION!
■ Make sure the device is switched off and the plug is pulled out of the mains socket.
1. Bring the needle up to the highest position with the hand wheel.
2. Lower the presser foot.
32
5. Raise the presser foot and turn the fabric 180°, using the
needle as the fulcrum.
6. Raise the needle, choose stitch 11, place the needle at the
edge of the stitch and carry on sewing until the buttonhole
is completed.
7. Remove the fabric from the sewing machine and cut
through the upper and lower threads.
8. Stick a pin on the inner edges of the two bar tacks across
the buttonhole. Use a seam ripper to prick into the middle
of the buttonhole and cut the buttonhole in one direction
and then in the other direction towards the pin. Make sure
that you do not unstitch the seam.