Table des Matières
Publicité
ENGLISH
– Rotate the head by 180° and repeat until the opposite side of the nut is split (see Fig.
6b); the nut is now completly split and can be easily removed.
2.4) Blade retraction
By pressing the pressure release button (201) on the body of the tool below operating
button (06), the ram will retract, opening the blades.
2.5) Battery status
After releasing the operating button, the residual battery
44
capacity is automatically displayed for 5 seconds on the
indicator (04).
43
The number of LEDs illuminated indicates the residual
capacity:
10 LEDs illuminated: Fully charged
5 LEDs illuminated: 50 % capacity
1 LED illuminated: Minimum charge
3. WARNING
45
T
he Tool is unsuiTable for conTinuous use and should be allowed To
cool down following uninTerrupTed
having exhausTed a fully charged baTTery in one session
delay baTTery replacemenT for a few minuTes
o
bserve recommended resT periods also when using an exTernal power
.
supply
201
p
roTecT The Tool from rain and moisTure
. e
-
08
and baTTery
lecTro
hydraulic Tools should noT be operaTed in pouring
.
rain or under waTer
61
3.1) Using the battery charger
Carefully follow the instructions in the battery charger manual.
3.2) General information on how to use batteries
In order to use the batteries correctly, please follow these rules:
– Use the battery until the automatic residual energy display still has 1-2 LEDs showing:
this means the battery is almost completely discharged and no loss in the life of the
battery has been caused.
– Be particularly careful when charging a new battery the first 2-3 times in order to be certain
of maximising the available energy level.
– Allow the battery to cool down to ambient temperature prior to recharging.
– Rest the battery charger for at least 15 minutes between charges.
4. MAINTENANCE
The tool is robust, completely sealed, and requires very little daily maintenance.
Compliance with the following points should help to maintain the optimum performance
of the tool.
04
30
52
03
34
02
33
74
04
75
13
,
;
successive operaTions
for insTance
,
205
.
. w
aTer will damage The Tool
56
55
57
45
54
58
59
12
60
78
65
79
77
5
67
,
72
53
72
57
58
59
80
34
22
23
19
17
16
72
53
72
53
70
18
204
70
203
32
53
71
47
29
47
26
60
68
69
76
73
64
70
18
70
18
18
21
11
23
20
202
14
05
15
Publicité
Table des Matières
