External Input - JVC KD-ADV38 Manuel D'instructions

Menu items
IF Band Width
Area Setting
10
SIRIUS ID*
AV Input
12

External Input*

* 10
Appears only when SIRIUS Satellite Radio is connected.
11
* Reverse lamp lead connection is required. See Installation/Connection Manual (separate volume). The rear view
through the camera appears on the monitor in "Full" aspect ratio (regardless of the aspect ratio setting) when you
shift the gear to the reverse (R) position.
* 12
Not selectable when the component connected to the CD changer jack is selected as the source.
* 13
The name of the component detected through the CD changer jack is shown.
Selectable settings, [reference page]
Auto : Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
Wide : Subject to the interference from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
US : When using in North/Central/South America. FM/AM intervals are
set to 200 kHz/10 kHz.
Europe : When using in any other areas. FM/AM intervals are set to 50
kHz (100 kHz during auto search)/9 kHz.
South America : When using in South American countries where FM
interval is 100 kHz. AM interval is set to 10 kHz.
Your SIRIUS identification number appears on the monitor.
You can determine the use of LINE IN and VIDEO IN plugs.
Off : Select when no component is connected ("AV-IN" is skipped while
selecting the source).
Audio&Video : Select when connecting an AV component such as a
VCR.
Audio : Select when connecting an audio component such as a digital
audio player.
11
Camera* : Select when connecting the rear view camera.
11
Camera Mirror* : The mirror image of the rear view is displayed on
the monitor. (The monitor on the unit only; the normal rear view
appears on the external monitor.)
Navigation : Select when connecting a Navigation System. ☞ [44]
For connecting an external component to the CD changer jack on the
rear.
Changer/iPod/D. Player*
☞ [38, 43]
External Input : Any other than the above. ☞ [45]
• For connecting JVC DLP/XMDJVC100, this setting is not required. It is
automatically detected.
53
13
: CD changer, iPod, or D. player
SETTINGS