Troubleshooting - JVC KD-ADV38 Manuel D'instructions

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.
Symptoms
• No sound comes out of the center speaker.
• The monitor is not clear and legible.
• The unit does not work at all.
• The remote controller does not work.
• "No Signal" appears.
• "Mecha Error Push Reset" appears on the
monitor, and the panel does not move.
• SSM automatic presetting does not work.
• Static noise while listening to the radio.
• Disc can be neither recognized nor played .
• Disc cannot be ejected.
• Recordable/Rewritable discs cannot be
played back.
• Tracks on the Recordable/Rewritable discs
cannot be skipped.
• Playback does not start.
• The playback picture is not clear and legible.
• Sound and pictures are sometimes
interrupted or distorted.
Remedies/Causes
• Center speaker is not activated. (☞ page 52)
Once you have reset the unit, make sure to activate the
speaker again.
• Center speaker is used only for surround playback. No
sound comes out for stereo playback.
Sunshine from the windshield may cause this symptom.
Adjust <Bright>. (☞ page 49)
Reset the unit. (☞ page 3)
Deactivate Dual Zone. (☞ page 26)
(While Dual Zone is activated, the remote controller only
functions for operating the DVD/CD player.)
• Change the source.
• Start the playback on the external component connected
to VIDEO IN plug.
• Check the cords and connections.
• Signal input is too weak.
Reset the unit. (☞ page 3)
Store stations manually. (☞ page 12)
Connect the antenna firmly.
Eject the disc forcibly. (☞ page 3)
Unlock the disc. (☞ page 18)
• Insert a finalized disc.
• Finalize the discs with the component which you used
for recording.
• Insert the disc correctly again.
• Region code of the DVD is not correct. (☞ page 4)
• The format of files is not supported by the unit.
Adjust items in <Picture Adjust>. (☞ page 49)
• Stop playback while driving on rough roads.
• Change the disc.
65
REFERENCES