Reset Procedure - bioMerieux SAMPL'AIR LITE Manuel Utilisateur

SAMPL'AIR LITE

8.6 Reset procedure

Reset is not an usual operation, but it may be necessary to do so after the update of the software or if the
device is not operating correctly.
To reset your Sampl'air Lite, press simultaneously the Enter and Escape key during 5 seconds.
The following data are reset to default values:
o Program list (10 min / 10 L)
o Configuration options
language : english
o
o backlight : off
NOTE : After resetting, it is necessary to
resume the complete programming ( list of the
programs, choice of the language, backlight
and administrator code).
In case of jamming of the device, stopping the sampler is also possible when inserting a stick in the « forced
stop » hole that is situated at the bottom of the device. Note that the data you have keyed in and saved in the
memory are not deleted when proceeding like this, it resets only the main PCB.
54
MANUEL UTIILSATION / USER'S MANUAL
Are not reset:
o serial number of unit
o calibration data
o operational counters
MA107501