Settings; Installation; Choice Of The Language; Setting The Backlight - bioMerieux SAMPL'AIR LITE Manuel Utilisateur

SAMPL'AIR LITE

6.1 Installation

6.1.1 Choice of the language

At first use, English is the default language. Language options are English, French, German and Spanish.
To change the language:
SAMPL'AIR
<

SETTINGS

Enter
SETTINGS
< INSTALLATION >
Enter
INSTALLAION
< LANGUAGE
Enter
FRANCAIS
LANGUAGE ?
ESPANOL
< ENGLISH
DEUTSCH
ENGLISH
Choice + Enter
Operating language is
modified

6.1.2 Setting the backlight

The user interface backlight may be set in three ways:
Disabled
-
- Permanent ( backlight always on when the Sampl'air is on)
Temporised (After 20 seconds, the backlight turns off until the next key is pressed on)
-
To select the backlight:
SAMPL'AIR
< SETTINGS
Enter
SETTINGS
< INSTALLATION >
Enter
INSTALLATION
< BACKLIGHT
Enter
DISABLED
BACKLIGHT
PERMANENT
< DISABLED
TEMPORISED
Choice + Enter
Backlight is modified
42
MANUEL UTIILSATION / USER'S MANUAL
6. SETTINGS
1- Go to the Setting Menu pressing the right arrow once, confirm by
>
pressing Enter.
2- Select the 'Installation' submenu, then press Enter to confirm
3- Select 'Language' with the directional arrows, confirm by pressing
>
Enter
>
4- Select the language you want from the 4 languages available,
then press Enter to confirm.
Back to the
>
1- Go to Settings menu using the directional arrows and then
press Enter to confirm(Access code is required: enter '0' which is
the default access code).
2- Select the Installation submenu, confirm by pressing Enter
3- Select 'Backlight' with the directional arrows, and confirm
>
by pressing Enter
>
4- Select the mode using the directional arrows, and confirm
your choice by pressing Enter
Back to the
INSTALLATION
screen
INSTALLATION
screen
MA107501