Creating A Sampling Program; Program Mode - bioMerieux SAMPL'AIR LITE Manuel Utilisateur

SAMPL'AIR LITE

7.1.1 Creating a sampling program

Up to 10 programs may be created. Sampling will be achieved according to a time or volume entered by
the operator. (See table of correspondence § 10.1)
To create a program, proceed as follows:
SAMPL'AIR
<
<
VOLUME

PROGRAM MODE?

TIME
<
Volume
VOLUME?
- L
Key in + Enter
Yes
THIS PROGRAM
ALREADY EXISTS !
Enter/ Esc
For the most usually used media, a cycle longer than 15 minutes may lead to the
culture medium drying, and affect its fertility.
44
MANUEL UTIILSATION / USER'S MANUAL
SAMPLE >
Enter
SAMPLE
CREATE >
Enter
VOLUME >
Choice+Enter
program
mode
?
Time
TIME?
- Min
Key in+Enter
No
Already
exists ?
2500L
SAVE ?
Enter
Program is recorded
1- Select Sample menu, then press Enter
2- Select Create using the directional arrows then press
Enter
3- Select either volume or time using the directional
arrows then press Enter
4- Program mode :
If you have selected volume, enter the volume in litres
(from 50 to 9999 litres).
If you have selected time, enter the sampling time in
minutes (from 1 to 99 minutes) .
Press Enter
If the program already exists, a tone sounds.
Return to the previous screen by pressing ESCAPE.
5- To confirm storage : press Enter
SAMPLE
Back to the
MA107501
menu