Deleting A Sampling Program; Starting A Sampling Program - bioMerieux SAMPL'AIR LITE Manuel Utilisateur

SAMPL'AIR LITE

7.1.2 Deleting a sampling program

You may delete programs if there is at least one program recorded.
To delete a program, proceed as follows:
SAMPL'AIR
< SAMPLE
Enter
SAMPLE
< DELETE
Enter
DELETE PROG.
< 2500L
Choice + Enter
2500L
DELETE?
Enter
Program is deleted

7.1.3 Starting a sampling program

To start a sampling cycle, proceed as follows:
SAMPL'AIR
< SAMPLE
Enter
SAMPLE
< 1000L
Enter
1000L START?
Enter
PROGRAM IS STARTED
MANUEL UTIILSATION / USER'S MANUAL
1- Select the Sample menu then press Enter
>
2- Select 'Delete' using the directional arrows and then press Enter
>
3- Select the program to be deleted in the menu (eg. 2500L for
example),then press Enter
>
4- To confirm the deletion, press Enter
To cancel deletion, press Escape once
To go back to SAMPLE menu, press ESCAPE twice.
Back to the
1- Select the Sample menu, then press Enter
>
2- Select the program to be started using the directional arrows. The
chosen program is displayed on the lower line, press Enter.
>
(Possibility of creating or deleting a program as well)
3- The start screen is displayed: program + start?
To begin the sampling, press Enter or the "Start" key from the
remote control.
A signal tone sounds and the collection starts
SAMPLE
menu
MA107501
45