Eaton ATS 30 Manuel D'installation Et D'utilisation page 64

8. SNMP IPv6 for ATS
8.5 Upgrade
• Upgrade via Web
You can upgrade the SNMP IPv6's firmware or the ATS's firmware through the SNMP IPv6 for ATS Web
(please see the following figure).The SNMP IPv6 will restart after finishing self-upgrade. If you upload the
ATS's firmware to the Web, you can see the ATS's firmware upgrade progress from the Web.
• Upgrade via FTP/ SFTP
You can also upgrade the SNMP IPv6's firmware or the ATS's firmware by using FTP or SFTP program. Make
sure you upload correct images to upgrade_snmp when upgrading SNMP IPv6's firmware, and upload
correct images to upgrade_device when upgrading the ATS's firmware.
Page 4
IPv6 for ATS-00_EN