Introduction; Presentation; Weights And Dimensions; Front Panel Layout - Eaton ATS 30 Manuel D'installation Et D'utilisation

1. Introduction

The EATON ATS 30 is designed to guarantee the uninterrupted operation of sensitive equipment. It is
powered by two independent power sources and automatically makes a rapid switch form one source to
the other when the power supply used to power its connected load fails. T his ATS is designed to be efficient
and reliable.
Users can know power flow and the EATON ATS 30's status from the user-friendly front panel. Besides,
the unit has a network interface for users to read and write parameters. The network interface can be
implemented via the Ethernet protocol through an RJ45 connector. All information is available on the front
panel and the LOCAL port on the front panel is available over the network through the RJ45 connector.

2. Presentation

2.1

Weights and dimensions

Rack installation
Description
EATS30N - EATS30H
EATS30P
2.2

Front panel layout

There are two models. Please see the following pictures.
EATS30N - EATS30H (EU)
EATS30P (US)
Page 4
W
Weights Dimensions H x W x D
(lb/kg) (inch/mm)
10.6 / 4.8 1.7 x 17.4 x 15.4 / 43 x 440 x 390
17 / 7 .7 1.7 x 17.4 x 15.4 / 43 x 440 x 390
1 1 2 3
1 1 2 3
D
H
Cable gland (input)
4 1
Cable gland (output)
2
User interface
3
Communication card
4
L6-30P
4 1
L6-30R
2
User interface
3
Communication card
4
ATS-01_EN