Device Description; Usage - Beurer MP 52 Mode D'emploi

4. DEVICE DESCRIPTION

The corresponding drawings are shown on page 3.
Manicure/pedicure device
1
ON/OFF button
2
+/- speed regulation
3
LED status display
4
Blue = ready for use
Red = anti-clockwise rotation
Green = clockwise rotation
USB-C connection
5
Sapphire wheel, fine
6
Sapphire cone, fine
7

5. USAGE

1. Connect the USB-C connection
the mains adapter.
2. Continuous blue illumination of the LED status display
the device is ready for operation.
Before using the device, please do not carry out pre-treatment
in a water bath, as the callus attachments are less effective on
soaked or wet skin.
3. Make sure that the device is switched off.
4. Select the desired attachment part and carefully press it onto the axle
of the device. To remove, pull apart the attachment and the device in
opposing directions.
5. Switch the device on by pressing the ON/OFF button
change the direction of rotation by briefly pressing the ON/OFF but-
ton again (anti-clockwise rotation red / clockwise rotation green).
2
If you press and hold the ON/OFF button
Sapphire cone, coarse
8
Felt cone
9
Attachment for using the
10
sandpaper attachments
Single-use attachments
11
made of sandpaper
Flame-shape cutter
12
Sapphire cutter, round
13
to the supplied USB-C cable and
5
, the device switches off.
2
22
means that
4
. You can
2