Bartscher 70 Série Mode D'emploi page 22

CEE 2004/108 - Electromagnetic Compatibility (EMC)
98/37/EC - Appliance Regulation
and the particular reference norms.
Declaration of conformity
The manufacturer declares that the appliances of their production meet the above mentioned EEC
directives and requires the installation be done observing the norms in force.
Electric multi-purpose bratt pan.
The electric multi-purpose bratt pan has a sturdy structure of stainless steel placed on four feet, thus
enabling the height regulation. The external coating is made of Chrome-Nickel 18-10 stainless steel.
Each vat is made of stainless steel with an AISI 316 L (compound) bottom and it is provided with a
large drain hole for draining food (in particular the half-liquid ones) in the basin of stainless steel
situated in the cabinet of the appliance. A Teflon plug closes the hole during the cooking.
The machine is provided with a thermostat, which enables the regulation of the temperature in a
range from 150° C to 350° inclusive; safety is ensured by means of a manual thermostat.
The electric multi-purpose bratt pan is heated by means of irradiation heating elements that grant
the cooking uniformity on the whole vat bottom.
Place
It is advisable to install the appliance in a well-ventilated room or under an extractor hood. The
appliance may be installed as a single unit or together with others. In both cases, if it is installed
near a wall of inflammable material, protective measures have to be taken (e.g. use of sheets of
refractory material), so to ensure that the temperature of the walls is within the established safety
limits.
Installation
Installation operations, voltage conversions to other than the original, starting up the installation of
appliance, ventilation and maintenance have to be done following the manufacturer's instructions
and observing the norms in force by qualified personnel, in compliance with the following
provisions (GB):
ƒ Health and Safety at Work Act, 1974
ƒ Codes of Practice, BS6173, 1982
ƒ The Building Regulations, 1985
ƒ The Building Standards Regulations, 1981
DESCRIPTION OF APPLIANCES
PROVISIONS FOR INSTALLATION
Pag. 21/39