Swc (Steering Wheel Control) - Audiovox VME 9520 NAV Mode D'emploi

SWC (Steering Wheel Control)

SWC Menu
The VME 9520NAV is compatible with
the PAC (Pacific Accessory Corpora-
tion) steering wheel control adapter
SWI-PS. A 3.5mm female connec-
tor (labeled "SWC") on the back of
the head unit allows connectivity to
the PAC adapter. Please refer to the
instructions included with the PAC
adapter for detailed installation informa-
tion. The steering wheel control option
allows you to program your existing
steering wheel controls to work with the
VME 9520NAV.
Accessing the "SWC" Menu:
To access SWC mode, select the
"SWC" icon on page 2 of the Main
Menu.
NOTE: Before you begin, you MUST
press the button to clear any prior
programming options. If a mistake is
made during the programming se-
quence, press the
settings and start over. Otherwise, the
steering wheel control function may not
function properly.
button to clear all
Programming Keys 1-7:
1. Press the button to clear any
existing program settings.
2. Touch the option (N/A) next to
each Key number to open a
window with possible program-
ming options (use the up/down
arrow buttons on the right side of
the screen to view additional Key
choices).
3. Use the up/down arrows to navi-
gate the list. Touch to select the
desired function for the selected
Key number.
4. Continue with Key 1 - Key 7 (Keys
+1 through +7 are reserved for
future use).
5. After selecting a desired function
for each Key (1-7), press the
button to begin programming your
choices to the buttons on your
steering wheel control. Follow the
on-screen commands to complete
this process, pressing the left/right
arrow buttons to move between
Key selections.
32