Box Contents; Required Equipment; Recommended Tools; Getting Started Checklist - Horizon Hobby axial GRAVE DIGGER SMT10 Mode D'emploi

EN

BOX CONTENTS

• Spektrum STX2 2.4GHz Transmitter (SPMSTX200)
™ ®
• AXI03019 - SMT10 Grave Digger 1/10th 4wd Monster Truck RTR
- 12T 550 Electric Motor (DYNS1222)
- SRX200 2CH Receiver (SPMSRX200)
- 15KG Servo, Waterproof, Metal Cent. Case, 23T (SPMS614)
- WP 60A Fwd/Rev Brushed ESC (DYNS2210)

REQUIRED EQUIPMENT

• (4) AA Alkaline batteries

RECOMMENDED TOOLS

• Hex Drivers (1.5, 2.0, 2.5mm)

GETTING STARTED CHECKLIST

Read the manual
Familiarize yourself with the vehicle and its components
Check all screws, especially the driveshaft setscrews, for tightness
from the factory
Charge the vehicle battery
Install 4 AA batteries in the transmitter
• 2s LiPo Battery • 5-9 Cell NiMH/NiCd battery
(IC3™ Connector Required)
OR
• Parts Bag
• Hobby Knife
• Curved Scissors
Power on the transmitter
Install the vehicle battery in the vehicle
Check for proper function of the throttle and steering
Range check the radio system
Drive the vehicle, challenge yourself and have FUN!
Perform any necessary vehicle maintenance
4
• Cross Wrench
• Battery charger compatible with
the chosen vehicle battery type
• Side Cutter
• Long-nose Plier