Warning And Safety Instructions - Amann Girrbach smartbox invest Mode D'emploi

!
warnInG anD saFety
InstrUctIons
Smartbox Invest was developed for use in the
dental sector. Setting up and operation must be
carried out in line with the operating instructions.
The manufacturer assumes no liability for
damage arising from other or improper use.
Furthermore, before using it, the user is obliged,
on his own responsibility, to check the machine's
suitability and usability for the intended purposes
insofar as these purposes are not listed in the
instruction manual.
All repairs and/or servicing work, apart from
those described under „Maintenance/care",
may only be carried out by the manufacturer or
authorised service companies.
Before transporting, completely empty the
powder silo and completely clean the conveyor
screw by means of a vacuum cleaner. In addition,
completely empty the liquid storage tank. Always
transport the Smartbox in its original packaging.
_ only use original amannGirrbach
accessories or spare parts!
_ switch the machine off before carrying out
any maintenance and cleaning work!
_ regularly check the outlet of the liquid hose
and clean if necessary!
_ the inner walls of the powder silo have a
special coating that can be damaged by a
scouring sponge or pointed object! only
soft brushes or cloths should be used for
cleaning!
_ check the ventilator of the cooling unit and
control (back of machine) at least every 4
weeks. In order to do so, remove the plastic
covers, inspect the filter units and clean
with water and/or compressed air if neces-
sary. caUtIon: do not insert any damp
filter units!
_ Investment material contains quartz and
cristobalite. Do not breath the dust in since
there is a risk of lung damage (silicosis, lung
cancer)!
_ we strongly recommend connecting a
suitable laboratory extraction unit to the
smartbox!
Gb
27