Amann Girrbach smartbox invest Mode D'emploi page 22

Gb
ProGraMMable MeasUrInG
ProGraMs
In order to store your own individual programs,
you can use sub-items 2-6 on menu level 1.
For every sub-point, 10 programs can be stored
(preset descriptions: Alloy A to J).
In order to measure the indicated parameters of
the program, press the start button (3).
To change or program, press the MFK (1) for a
long time (protective function against undesired
overwriting). The adjustable parameters will be
displayed:
_ Powder quantity: arrow to powder quantity,
select (press MFK), change (turn MFK) and
confirm (press MFK)
_ Concentration: arrow to concentration, select,
change and confirm. For checking purposes, the
proportion of the liquids in ml relating to the
powder reference quantities are displayed (see
basic settings!).
_ Program name: arrow to program name, select
(pressMFK).
22
Every letter of the name can now be changed
by turning the MFK (1). By pressing the MFK, the
cursor jumps to the next letter. Once the desired
name has been input, press the MFK to get to the
end of the line. After confirming the last position,
the display goes back a level and the altered
name is automatically recorded.
chanGInG the DesIGnatIons oF IteMs
2-6 on MenU level 1
Select the point to be changed. On menu level 2,
place the cursor arrow in front of the designation
by turning the MFK (e.g. 2 Individual crowns). In
order to change the designation, proceed as with
„Programmable measuring programs".
scales
This function serves to weigh any components
- without using the measuring function of Smart-
box Invest (e.g. to weigh the quantity of another
investment material): menu level 1 additional
functions, menu level 2 select scales - set up
beaker (6) and tare with start button (3), weigh
out the desired quantity.
only lIqUID
Only the liquids are measured - without measuring
the powder (e.g. for the use of liquids with another
investment material). Set the desired total liquid
quantity and concentration of the liquid, similarly
to individual measuring, and start the measuring
using the start button (3).