Percent Weighing; Establishing A Reference Weight - OHAUS Defender 5000 TD52P Mode D'emploi

EN-44
Press the button
With the button corresponding to the icon
go down the list and highlight Application Mode.
Enter this sub-menu by pressing the button
corresponding to the icon
In the Application Mode menu enter the Check
sub-menu.
The Check sub-menu is now displayed.
Select the list item and press the Softkey
corresponding to the icon
setting as desired.
setup, press the Softkey corresponding to the
icon to return to the main application
screen.

4.4 Percent Weighing

Use Percent Weighing to measure the weight of a sample displayed as a percentage of a pre-
established Reference Weight.
Press the button
to Percent is displayed in the upper left portion of the
home screen.
Establish a reference weight according to section
4.4.1 and then place the objects on the pan to display
the percentage.
The default (or last) Reference Weight is displayed on
the main screen.

4.4.1 Establishing a Reference Weight

There are 3 methods to establish a reference weight:
Method 1
Key in the reference weight value using the
alphanumerical keypad.
Press the Softkey corresponding to the icon
for confirmation.
to enter the Main Menu.
.
to change the
After completion of I/O's
until the icon corresponding
,
Defender 5000 Indicators