Page 1 Defender 5000 Indicators Instruction Manual 1.800.561.8187 information@itm.com www. .com...
Page 2: Table Des Matières
Defender 5000 Indicators EN-1 TABLE OF CONTENTS 1. INTRODUCTION..........................5 1.1 Safety Precautions 1.1.1 Relay Option Safety Precautions 1.2 Overview of Parts and Controls 1.3 Control Functions 2. INSTALLATION..........................10 2.1 Unpacking 2.2 External Connections 2.2.1 Scale Base with Connector 2.2.2 RS232 interface Cable to TD52P 2.2.3 AC Power to TD52P 2.2.4 AC Power to TD52XW 2.2.5 Battery Power...
Page 3 EN-2 Defender 5000 Indicators 3.4.10 Reset 3.5 Readout Menu 3.5.1 Stability 3.5.2 Zero Range 3.5.3 Filter Level 3.5.4 Auto Zero Tracking 3.5.5 Auto Dim 3.5.6 ScreenSaver 3.5.7 Auto Off 3.5.8 Adjust Contrast 3.5.9 Reset 3.6 Discrete I/O 3.7 Weighing Unit 3.7.1 Gram (g) 3.7.2 Kilogram (kg) 3.7.3 Pound (lb)
Page 4 Defender 5000 Indicators EN-3 3.11 Lock Key Configuration 4. OPERATION...........................34 4.1 Weighing 4.1.1 Application Setup 4.1.2 Auto Tare 4.1.3 Accumulation 4.1.4 ID Input 4.1.5 Input/Output (I/O) Setup 4.2 Counting 4.2.1 Set the Average Piece Weight (APW) 4.2.2 Application Setup 4.2.3 Accumulation 4.2.4 Input/Output (I/O) Setup 4.3 Check 4.3.1 Check Weighing (default)
Page 5 EN-4 Defender 5000 Indicators 7.1 Settings 7.2 Verification 7.3 Sealing 8. MAINTENANCE..........................61 8.1 Model T52P Cleaning 8.2 Model TD52XW Cleaning 8.3 Troubleshooting 8.4 Service Information 9. TECHNICAL DATA ........................63 9.1 Specifications 9.2 Accessories and Options 9.3 Drawings and Dimensions 9.4 Table of Geo Values 10.
Page 6: Introduction
Defender 5000 Indicators EN-5 1. INTRODUCTION 1.1 Safety Precautions 1.1.1 Relay Option Safety Precautions CAUTION: ELECTRICAL SHOCK HAZARD. REMOVE ALL POWER CONNECTIONS TO THE INDICATOR BEFORE SERVICING OR MAKING INTERNAL CONNECTIONS. THE HOUSING SHOULD ONLY BE OPENED BY AUTHORIZED AND QUALIFIED PERSONNEL, SUCH AS AN ELECTRICAL TECHNICIAN.
Page 7: Overview Of Parts And Controls
EN-6 Defender 5000 Indicators 1.2 Overview of Parts and Controls TABLE 1-1 TD52P PARTS Item Description 1.800.561.8187 information@itm.com www. .com...
Page 8 Defender 5000 Indicators EN-7 1.2 Overview of Parts and Controls (Cont.) TABLE 1-2 TD52XW PARTS Item Description 1.800.561.8187 information@itm.com www. .com...
Page 9 EN-8 Defender 5000 Indicators 1.2 Overview of Parts and Controls (Cont.) TABLE 1-3 MAIN PC BOARD Item Description 1.800.561.8187 information@itm.com www. .com...
Page 10: Control Functions
Defender 5000 Indicators EN-9 1.3 Control Functions Button Action 1.800.561.8187 information@itm.com www. .com...
Page 11: Installation
EN-10 Defender 5000 Indicators 2. INSTALLATION 2.1 Unpacking 2.2 External Connections 2.2.1 Scale Base with Connector 2.2.2 RS232 interface Cable to TD52P Connection 2.2.3 AC Power to TD52P 2.2.4 AC Power to TD52XW 2.2.5 Battery Power 1.800.561.8187 information@itm.com www. .com...
Page 12: Internal Connections
Defender 5000 Indicators EN-11 2.3 Internal Connections 2.3.1 Opening the Housing CAUTION: ELECTRICAL SHOCK HAZARD. REMOVE POWER CONNECTIONS TO THE INDICATOR BEFORE SERVICING OR MAKING INTERNAL CONNECTIONS. THE HOUSING SHOULD ONLY BE OPENED BY AUTHORIZED AND QUALIFIED PERSONNEL, SUCH AS AN ELECTRICAL TECHNICIAN.
Page 13 EN-12 Defender 5000 Indicators Main Board Wiring Connections Jumper Connections 1.800.561.8187 information@itm.com www. .com...
Page 14: Rs232 Interface Cable To Td52Xw
Defender 5000 Indicators EN-13 2.3.3 RS232 Interface Cable to TD52XW 2.3.4 MICRO SD Card Installation 1.800.561.8187 information@itm.com www. .com...
Page 15: Td52Xw Rear Housing Orientation
EN-14 Defender 5000 Indicators 2.4 TD52XW Rear Housing Orientation 2.5 Mounting Bracket 1.800.561.8187 information@itm.com www. .com...
Page 16: Settings
Defender 5000 Indicators EN-15 3. SETTINGS 3.1 Menu Structure TABLE 3-1 MENU STRUCTURE Calibration Setup Read Out Application Mode Unit Communication 1.800.561.8187 information@itm.com www. .com...
Page 17 EN-16 Defender 5000 Indicators Unit Communication None 4-20mA 1.800.561.8187 information@itm.com www. .com...
Page 18 Defender 5000 Indicators EN-17 Lock Key SD Card Maintenance Note 1.800.561.8187 information@itm.com www. .com...
Page 19: Menu Navigation
EN-18 Defender 5000 Indicators 3.2 Menu Navigation Changing Settings 1. Enter the Menu 2. Select the Sub-menu 3. Select the Sub-Menu Item 4. Select the Setting 3.3 Calibration Menu NOTES 3.3.1 Zero Calibration Calibration procedures: 1.800.561.8187 information@itm.com www. .com...
Page 20: Span Calibration
Defender 5000 Indicators EN-19 3.3.2 Span Calibration Note: Calibration procedures: 1.800.561.8187 information@itm.com www. .com...
Page 21: Linearity Calibration
EN-20 Defender 5000 Indicators 3.3.3 Linearity Calibration Calibration procedures: 1.800.561.8187 information@itm.com www. .com...
Page 22: Geo Adjustment
Defender 5000 Indicators EN-21 3.3.4 GEO Adjustment Note: 1.800.561.8187 information@itm.com www. .com...
Page 23: Setup Menu
EN-22 Defender 5000 Indicators 3.4 Setup Menu bold Setup Options Capacity Unit Range Single Interval >|1|< Capacity >|1|< Graduation >|2|< Capacity >|2|< Graduation English Language Power On Zero Auto Power On Unit Key Beep Transaction Counter Next Transaction 1-9999999 Reset 3.4.1 Capacity Unit 3.4.2 Range Single...
Page 24: Graduation
Defender 5000 Indicators EN-23 Single Dual Dual Single 3.4.4 Graduation Single Dual Single NOTE: 3.4.5 Language English 3.4.6 Power On Zero 3.4.7 Power On Unit Automatic 3.4.8 Key Beep 1.800.561.8187 information@itm.com www. .com...
Page 25: Transaction Counter
EN-24 Defender 5000 Indicators 3.4.9 Transaction Counter NOTE: 3.4.9.1 Next Transaction 3.4.10 Reset NOTE: 3.5 Readout Menu bold Read Out Options Stability Zero Range 100% Filter Level Medium Auto Zero Track 0.5d Backlight 1min Screensaver 5min Auto Off Adjust Contrast Reset 3.5.1 Stability 3.5.2 Zero Range...
Page 26: Auto Zero Tracking
Defender 5000 Indicators EN-25 Medium 3.5.4 Auto Zero Tracking 0.5division 3.5.5 Auto Dim 1 min 3.5.6 ScreenSaver 5 min 3.5.7 Auto Off 3.5.8 Adjust Contrast 3.5.9 Reset NOTE: 1.800.561.8187 information@itm.com www. .com...
Page 27: Discrete I/O
EN-26 Defender 5000 Indicators 3.6 Discrete I/O Enable Reset 1.800.561.8187 information@itm.com www. .com...
Page 28: Weighing Unit
Defender 5000 Indicators EN-27 Application Mode Options & Discrete I/O Weighing Counting Check Percent Dynamic 3.7 Weighing Unit bold NOTE: 3.7.1 Gram (g) 1.800.561.8187 information@itm.com www. .com...
Page 29: Kilogram (Kg)
EN-28 Defender 5000 Indicators 3.7.2 Kilogram (kg) 3.7.3 Pound (lb) 3.7.4 Ounce (oz) 3.7.5 Pound: Ounce (lb: oz) 3.7.6 Tonne (Metric Tonne) 3.7.7 Ton (Short Ton) 3.7.8 Custom Unit (c) Factor Exponent Least Significant Digit (LSD) 1.800.561.8187 information@itm.com www. .com...
Page 30: Glp/Gmp Menu
Defender 5000 Indicators EN-29 Note: 3.8 GLP/GMP Menu 3.8.1 Date Format 3.8.2 Date 3.8.3 Time Format 3.8.4 Time 3.8.5 Project ID 3.8.6 Scale ID 3.8.6 Reset 1.800.561.8187 information@itm.com www. .com...
Page 31: Communication
EN-30 Defender 5000 Indicators 3.9 Communication bold 3.9.1 RS232/2nd RS232 Configuration Communication Options(bold is default) 9600 8 None 1 bit None Demand Stable Only Off, On (LFT Force On) Auto On Stable RS232/2 Mode Load, Load and Zero RS232 Auto On Accept Interval Time 1~50000...
Page 32: Print Setup Of Rs232/2Nd Rs232
Defender 5000 Indicators EN-31 3.9.1.3 Stop Bits 1 BIT 3.9.1.4 Handshake NONE = no handshaking 3.9.1.5 Alternate Print Command 3.9.1.6 Alternate Tare Command 3.9.1.7 Alternate Zero Command 3.9.1.8 Reset 3.9.2 Print Setup of RS232/2nd RS232 3.9.2.1 Demand Demand Stable Only Note: 3.9.2.2 Auto On Stable Auto On Stable...
Page 33 EN-32 Defender 5000 Indicators 3.9.2.5 MT-Continuous MT-Continuous MT-Continuous Note: MT-Continuous Checksum Off = disabled 3.9.2.6 OH-Continuous OH-Continuous OH-Continuous Note: OH-Continuous 3.9.2.7 SICS Note: SICS 3.9.2.8 Reference Balance Note: 3.9.2.9 Select Template Simple 3.9.2.10 Edit Template 1.800.561.8187 information@itm.com www. .com...
Page 34 Up to Up to Up to Up to 40 Not fixed, up to 30 Up to 30 Not fixed, up to 40 3.9.2.11 Edit String OHAUS 3.9.2.12 Reset 3.9.3 RS485 Configuration ® Defender 5000 RS232/RS485/USB Interface Instruction Manual 3.9.4 Ethernet Configuration ®...
Page 35: Lock Key Configuration
EN-34 Defender 5000 Indicators ® Defender 5000 Analog Kit Instruction Manual 3.10 Maintenance Configuration 3.11 Lock Key Configuration Item Available Settings (bold is the default settings) Note: 4. OPERATION Mode 4.1 Weighing 1.800.561.8187 information@itm.com www. .com...
Page 36: Application Setup
Defender 5000 Indicators EN-35 Weighing Tare Zero 4.1.1 Application Setup Configuration Configuration The Weighing Configurations are defined below Bold Item Available Settings Comments 4.1.2 Auto Tare 4.1.3 Accumulation Accumulate 1.800.561.8187 information@itm.com www. .com...
Page 37: Id Input
EN-36 Defender 5000 Indicators Note: Accumulate Manual Automatic Viewing the Accumulation Results Accumulate Result Print 4.1.4 ID Input 4.1.5 Input/Output (I/O) Setup Bold Item Available Settings Off, Off, Off, 1.800.561.8187 information@itm.com www. .com...
Page 38: Counting
Defender 5000 Indicators EN-37 Off, Note: Application Mode Weighing 4.2 Counting Counting 4.2.1 Set the Average Piece Weight (APW) Note: Method 1 1.800.561.8187 information@itm.com www. .com...
Page 39 EN-38 Defender 5000 Indicators Method 2 Method 1 Method 2 1.800.561.8187 information@itm.com www. .com...
Page 40: Application Setup
Defender 5000 Indicators EN-39 4.2.2 Application Setup Configuration Configuration Bold Bold 1.800.561.8187 information@itm.com www. .com...
Page 41: Accumulation
EN-40 Defender 5000 Indicators 4.2.3 Accumulation 4.2.4 Input/Output (I/O) Setup Bold). Item Available Settings Off, Off, Off, Off, Off, Off, Note: Application Mode Counting 4.3 Check Check 1.800.561.8187 information@itm.com www. .com...
Page 42: Check Weighing (Default)
Defender 5000 Indicators EN-41 Check Mode 4.3.1 Check Weighing (default) Check Check Weighing Under/Accept/Over Defining Over/Under Limits Edit Limit Bold Bold Check Weighting Check weighing mode Off/ 4.3.2 Check Counting 1.800.561.8187 information@itm.com www. .com...
Page 43: Application Setup
EN-42 Defender 5000 Indicators Under/Accept/Over Set the Average Piece Weight (APW) Note: Defining Over/Under Limits Edit Limit Note: 4.3.3 Application Setup Configuration Setup Configuration Menu 1.800.561.8187 information@itm.com www. .com...
Page 44: Input/Output (I/O) Setup
Defender 5000 Indicators EN-43 Bold Bold Weighting Weighing Accept Accept 4.3.4 Input/Output (I/O) Setup Bold). Item Available Settings Off, Off, Off, Off, Off, Off, Note: 1.800.561.8187 information@itm.com www. .com...
Page 45: Percent Weighing
EN-44 Defender 5000 Indicators Application Mode Check Check 4.4 Percent Weighing Percent 4.4.1 Establishing a Reference Weight Method 1 1.800.561.8187 information@itm.com www. .com...
Page 46: Application Setup
Defender 5000 Indicators EN-45 Method 2 Method 3 4.4.2 Application Setup Configuration 1.800.561.8187 information@itm.com www. .com...
Page 47: Input/Output (I/O) Setup
EN-46 Defender 5000 Indicators The Percent Configurations are defined below Bold Bold 4.4.3 Input/Output (I/O) Setup Bold). Item Available Settings Note: Application Mode Percent 1.800.561.8187 information@itm.com www. .com...
Page 48: Dynamic Weighing
Defender 5000 Indicators EN-47 4.5 Dynamic Weighing Manual Semi-Automatic Automatic Dynamic 4.5.1 Application Setup Configuration Menu 1.800.561.8187 information@itm.com www. .com...
Page 49 EN-48 Defender 5000 Indicators The Dynamic Configurations are defined below Bold Bold Count down Count down Manual Manual Semi-Automatic Automatic: Note: 3.000 (with current unit) Semi-Automatic/ Automatic Manual: Automatic: 1.800.561.8187 information@itm.com www. .com...
Page 50: Average Time Setup
Defender 5000 Indicators EN-49 Bold Note: 4.5.2 Average Time Setup Note: Method 1 Dynamic 1.800.561.8187 information@itm.com www. .com...
Page 51: Input/Output (I/O) Setup
EN-50 Defender 5000 Indicators Method 2 4.5.3 Input/Output (I/O) Setup Bold). Item Available Settings Off, Off, Off, Off, Off, Off, Note: Application Mode Dynamic 1.800.561.8187 information@itm.com www. .com...
Page 52: Serial Communication
Defender 5000 Indicators EN-51 5. SERIAL COMMUNICATION 5.1 Interface Command OHAUS Commands 5.2 RS232 Interface 1.800.561.8187 information@itm.com www. .com...
Page 53: Connecting To A Computer
EN-52 Defender 5000 Indicators 5.3 Connecting to a Computer 5.4 Connecting to a Serial Printer 5.5 Printouts Check Weighing application: Field Length Non-Check Weighing application: Field Length Weight Unit Stability 1.800.561.8187 information@itm.com www. .com...
Page 54: Printout Examples
Defender 5000 Indicators EN-53 T/N/G/PT Application Status (for Check) Terminating Character(s) Note: 5.6 Printout Examples Setup in Menu Print out 6. MICRO SD CARD SD Card Options( Library Enable Memory RS232 User Note: 1.800.561.8187 information@itm.com www. .com...
Page 55: Library
EN-54 Defender 5000 Indicators 6.1 Library Directory Weighing Library Counting Check Library Items * Only Checkcounting library has the APW value. Library Display Enter Library Library 1.800.561.8187 information@itm.com www. .com...
Page 56 Defender 5000 Indicators EN-55 Create a new library Search Library 1.800.561.8187 information@itm.com www. .com...
Page 57: User
EN-56 Defender 5000 Indicators Recall Library Exit Library 6.2 User User Login User Profile Directory User 1.800.561.8187 information@itm.com www. .com...
Page 58 Defender 5000 Indicators EN-57 Enter User Profile Add a New User Search a User 1.800.561.8187 information@itm.com www. .com...
Page 59 EN-58 Defender 5000 Indicators Edit & Delete a User Supervisor Authority Password Rule 1.800.561.8187 information@itm.com www. .com...
Page 60: Alibi
Defender 5000 Indicators EN-59 6.3 Alibi SD card is not installed) Alibi Memory Record 1.800.561.8187 information@itm.com www. .com...
Page 61: Editable
EN-60 Defender 5000 Indicators 6.4 Editable Editable Link to Link to' RS232 RS232. 7. LEGAL FOR TRADE 7.1 Settings 7.2 Verification 1.800.561.8187 information@itm.com www. .com...
Page 62: Sealing
Defender 5000 Indicators EN-61 7.3 Sealing 8. MAINTENANCE CAUTION: DISCONNECT THE UNIT FROM THE POWER SUPPLY BEFORE CLEANING. 8.1 Model T52P Cleaning 8.2 Model TD52XW Cleaning 1.800.561.8187 information@itm.com www. .com...
Page 63: Troubleshooting
EN-62 Defender 5000 Indicators 8.3 Troubleshooting TABLE 8-1 TROUBLESHOOTING SYMPTOM PROBABLE CAUSE (s) REMEDY 1.800.561.8187 information@itm.com www. .com...
Page 64: Technical Data
Defender 5000 Indicators EN-63 9. TECHNICAL DATA 9.1 Specifications Materials Ambient conditions TABLE 9-1 SPECIFICATIONS 1.800.561.8187 information@itm.com www. .com...
Page 65: Accessories And Options
EN-64 Defender 5000 Indicators 9.2 Accessories and Options TABLE 9-2 OPTIONS Description 1.800.561.8187 information@itm.com www. .com...
Page 66: Drawings And Dimensions
Defender 5000 Indicators EN-65 9.3 Drawings and Dimensions 1.800.561.8187 information@itm.com www. .com...
Page 67: Table Of Geo Values
EN-66 Defender 5000 Indicators 9.4 Table of Geo Values TABLE 9-4 GEO CODES Elevation in meters 1300 1625 1950 2275 2600 2925 3250 1300 1625 1950 2275 2600 2925 3250 3575 Elevation in feet 1060 2130 3200 4260 5330 6400 7460 8530 9600...
Page 68: Compliance
Defender 5000 Indicators EN-67 10. COMPLIANCE Important notice for verified weighing instruments in the EU FCC Note Industry Canada Note ISO 9001 Registration 1.800.561.8187 information@itm.com www. .com...
Page 69 EN-68 Defender 5000 Indicators Disposal 1.800.561.8187 information@itm.com www. .com...
Page 70: Appendices
Defender 5000 Indicators EN-69 11. APPENDICES 11.1 Appendix A MT Standard Continuous Output Status Indicated Weight Tare Weight Character 1 6 7 8 9 10 12 13 14 15 16 Data SB-A SB-B SB-C MSD - - - - LSD MSD - LSD CR Continuous Output Format Notes: Table 5-2: Status Byte A Bit Definitions...
Page 71 EN-70 Defender 5000 Indicators Table 5-3: Status Byte B Bit Definitions Status Bits Function Bit 0 Bit 1 Bit 2 Bit 3 Bit 4 Bit 5 Bit 6 Table 5-4: Status Byte C Bit Definitions Bits 2, 1, and 0 Weight Description Bit 3 Bit 4...
Page 72: Appendix B
Defender 5000 Indicators EN-71 11.2 Appendix B MT-SICS Commands 1.800.561.8187 information@itm.com www. .com...
Page 73 EN-72 Defender 5000 Indicators LIMITED WARRANTY 1.800.561.8187 information@itm.com www. .com...
Page 74 Indicadores Defender 5000 ES-1 ÍNDICE 1. INTRODUCCIÓN ..........................5 1.1 Precauciones de seguridad 1.1.1 Precauciones de seguridad para la opción de relé 1.2 Descripción de las piezas y controles 1.3 Funciones de control 2. INSTALACIÓN..........................10 2.1 Desembalaje 2.2 Conexiones externas 2.2.1 Base de báscula con conector 2.2.2 Cable de interfaz RS232 para TD52P 2.2.3 Corriente eléctrica a TD52P 2.2.4 Corriente eléctrica a TD52XW...
Page 75 ES-2 Indicadores Defender 5000 3.4.9 Transaction Counter (Contador de transacciones) 3.4.10 Reset (Restablecer) 3.5 Readout Menu (Menú de lectura) 3.5.1 Stability (Estabilidad) 3.5.2 Zero Range (Rango cero) 3.5.3 Filter Level (Nivel de filtrado) 3.5.4 Auto Zero Tracking (Cero automático) 3.5.5 Auto Dim (Oscurecimiento automático) 3.5.6 ScreenSaver (Salvapantallas) 3.5.7 Auto Off (Apagado automático) 3.5.8 Adjust Contrast (Ajuste de contraste)
Page 76 Indicadores Defender 5000 ES-3 3.10 Configuración de mantenimiento 3.11 Configuración de la tecla de bloqueo 4. FUNCIONAMIENTO ........................34 Pesaje 4.1.1 Configuración de la aplicación 4.1.2 Tara automática 4.1.3 Acumulación 4.1.4 Id. de entrada 4.1.5 Configuración de Entrada/Salida (E/S) Recuento 4.2.1 Configurar el peso medio de las piezas (APW) 4.2.2 Configuración de la aplicación...
Page 77 ES-4 Indicadores Defender 5000 6.4 Editable 7. LEGAL PARA COMERCIO ......................62 7.1 Configuración 7.2 Comprobación 7.3 Sellado 8. MANTENIMIENTO..........................63 8.1 Limpieza del modelo T52P 8.2 Limpieza del modelo TD52XW 8.3 Solución de problemas 8.4 Información de servicio 9. DATOS TÉCNICOS ........................65 9.1 Especificaciones 9.2 Accesorios y opciones 9.3 Esquemas y dimensiones...
Page 78: Introducción
Indicadores Defender 5000 ES-5 1. INTRODUCCIÓN 1.1 Precauciones de seguridad 1.1.1 Precauciones de seguridad para la opción de relé PRECAUCIÓN: RIESGO DE DESCARGA ELÉCTRICA. ELIMINE TODAS LAS FUENTES DE ENERGÍA AL INDICADOR ANTES DE REPARARLO O REALIZAR CONEXIONES INTERNAS. LA APERTURA DE LA CARCASA DEBE REALIZARSE SOLAMENTE POR PERSONAL AUTORIZADO, TAL COMO UN TÉCNICO ELECTRICISTA.
Page 79: Descripción De Las Piezas Y Controles
ES-6 Indicadores Defender 5000 1.2 Descripción de las piezas y controles TABLA 1-1 PIEZAS DEL TD52P Pieza Descripción 1.800.561.8187 information@itm.com www. .com...
Page 80 Indicadores Defender 5000 ES-7 1.2 Descripción de las piezas y controles (cont.) TABLA 1-2 PIEZAS DEL TD52XW Pieza Descripción 1.800.561.8187 information@itm.com www. .com...
Page 81 ES-8 Indicadores Defender 5000 1.2 Descripción de las piezas y controles (cont.) TABLA 1-3 PANEL PRINCIPAL DEL ORDENADOR Pieza Descripción 1.800.561.8187 information@itm.com www. .com...
Page 82: Funciones De Control
Indicadores Defender 5000 ES-9 1.3 Funciones de control Botón Función 1.800.561.8187 information@itm.com www. .com...
Page 83: Instalación
ES-10 Indicadores Defender 5000 2. INSTALACIÓN 2.1 Desembalaje 2.2 Conexiones externas 2.2.1 Base de báscula con conector 2.2.2 Cable de interfaz RS232 para TD52P Conexión 2.2.3 Corriente eléctrica a TD52P 2.2.4 Corriente eléctrica a TD52XW 2.2.5 Alimentación de pila 1.800.561.8187 information@itm.com www.
Page 84: Conexiones Internas
Indicadores Defender 5000 ES-11 2.3 Conexiones internas 2.3.1 Apertura de la carcasa PRECAUCIÓN: RIESGO DE DESCARGA ELÉCTRICA. ELIMINE TODAS LAS FUENTES DE ENERGÍA AL INDICADOR ANTES DE REPARARLO O REALIZAR CONEXIONES INTERNAS. LA APERTURA DE LA CARCASA DEBE REALIZARSE SOLAMENTE POR PERSONAL AUTORIZADO, TAL COMO UN TÉCNICO ELECTRICISTA.
Page 85 ES-12 Indicadores Defender 5000 Instalación de cables y conectores Conexiones de cableado de la placa principal Conexiones en puente 1.800.561.8187 information@itm.com www. .com...
Page 86: Cable De Interfaz Rs232 Para Td52Xw
Indicadores Defender 5000 ES-13 2.3.3 Cable de interfaz RS232 para TD52XW 2.3.4 Instalación de la tarjeta MICRO SD 1.800.561.8187 information@itm.com www. .com...
Page 87: Orientación De La Carcasa Posterior De Td52Xw
ES-14 Indicadores Defender 5000 2.4 Orientación de la carcasa posterior de TD52XW 2.5 Soporte de montaje 1.800.561.8187 information@itm.com www. .com...
Page 88: Configuración
Indicadores Defender 5000 ES-15 3. CONFIGURACIÓN 3.1 Estructura del menú TABLA 3-1 ESTRUCTURA DEL MENÚ Calibration Setup Read Out Application Mode Beep Volume Next Transaction Unit Communication 1.800.561.8187 information@itm.com www. .com...
Page 89 ES-16 Indicadores Defender 5000 Unit Communication 1.800.561.8187 information@itm.com www. .com...
Page 90: Menú De Navegación
Indicadores Defender 5000 ES-17 Unit Communication Lock Key SD Card Maintenance NOTA: 3.2 Menú de navegación Cambiar la configuración 1. Entre al menú 1.800.561.8187 information@itm.com www. .com...
Page 91: Calibration Menu (Menú De Calibración)
ES-18 Indicadores Defender 5000 2. Seleccione el submenú 3. Seleccione el elemento del submenú 4. Seleccione los ajustes 3.3 Calibration menu (Menú de calibración) NOTAS 3.3.1 Zero Calibration (Calibración a cero) Procedimiento de calibración: 1.800.561.8187 information@itm.com www. .com...
Page 92: Span Calibration (Calibración De Span)
Indicadores Defender 5000 ES-19 3.3.2 Span Calibration (Calibración de span) Nota: Procedimiento de calibración: 1.800.561.8187 information@itm.com www. .com...
Page 93: Linearity Calibration (Calibración De Linealidad)
ES-20 Indicadores Defender 5000 3.3.3 Linearity Calibration (Calibración de linealidad) Procedimiento de calibración: 1.800.561.8187 information@itm.com www. .com...
Page 94: Geo Adjustment (Ajuste Geográfico)
Indicadores Defender 5000 ES-21 3.3.4 GEO Adjustment (Ajuste geográfico) Nota: 3.4 Setup menu (Menú de configuración) negrita 1.800.561.8187 information@itm.com www. .com...
Page 95: Capacity Unit (Unidades De Capacidad)
ES-22 Indicadores Defender 5000 Configuración Opciones Capacity Unit Range Sencillo >|1|< Capacity >|1|<Graduation >|2|< Capacity >|2|<Graduation Inglés Language Power On Zero Power On Unit Auto Key Beep Transaction Counter Next Transaction 1-9999999 Reset 3.4.1 Capacity Unit (Unidades de capacidad) 3.4.2 Range (Rango) sencillo doble 3.4.3 Capacity (Capacidad)
Page 96: Graduation (Graduación)
Indicadores Defender 5000 ES-23 doble sencillo 3.4.4 Graduation (Graduación) sencillo doble doble sencillo NOTA: 3.4.5 Language (Idioma) English 3.4.6 Power On Zero (Encendido en cero) 3.4.7 Power On Zero (Unidad de encendido) Automático 3.4.8 Key Beep (Sonido del teclado) 1.800.561.8187 information@itm.com www.
Page 97: Transaction Counter (Contador De Transacciones)
ES-24 Indicadores Defender 5000 3.4.9 Transaction Counter (Contador de transacciones) NOTA: 3.4.9.1 Next Transaction (Transacción siguiente) 3.4.10 Reset (Restablecer) NOTA: 3.5 Readout Menu (Menú de lectura) negrita Lectura Opciones Stability Zero Range 100 % Filter Level (nivel de filtrado) Medium (Medio) Auto Zero Track 0.5d Backlight...
Page 98: Filter Level (Nivel De Filtrado)
Indicadores Defender 5000 ES-25 NOTA: 3.5.3 Filter Level (Nivel de filtrado) Medium (Medio) 3.5.4 Auto Zero Tracking (Cero automático) 0.5 d 3.5.5 Auto Dim (Oscurecimiento automático) 1 min 3.5.6 ScreenSaver (Salvapantallas) 5 min 3.5.7 Auto Off (Apagado automático) 3.5.8 Adjust Contrast (Ajuste de contraste) 3.5.9 Reset (Restablecer) 1.800.561.8187 information@itm.com...
Page 99: Discrete I/O (E/S Discreta)
ES-26 Indicadores Defender 5000 NOTA: 3.6 Discrete I/O (E/S discreta) Enable (Habilitar) Reset (Restablecer) Modo de aplicación y E/S Opciones discreta Weighing (Pesaje) Counting (Recuento) Check (Comprobar) 1.800.561.8187 information@itm.com www. .com...
Page 100: Weighing Unit (Unidad De Pesaje)
Indicadores Defender 5000 ES-27 Modo de aplicación y E/S Opciones discreta Percent Dynamic (Dinámico) 3.7 Weighing Unit (Unidad de pesaje) negrita NOTA: 3.7.1 Gramo (g) 3.7.2 kilogramo (kg) 3.7.3 Libra (lb) 3.7.4 Onza (oz) 3.7.5 Libra: Onza (lb: oz) 1.800.561.8187 information@itm.com www.
Page 101: Tonelada Métrica (Metric Tonne)
ES-28 Indicadores Defender 5000 3.7.6 Tonelada métrica (Metric Tonne) 3.7.7 Tonelada (Short Ton) 3.7.8 Unidad personalizada (c) Factor 0,1000000 Exponente Dígito menos significativo (LSD) Nota: 3.8 GLP/GMP Menu (Menú GMP) 3.8.1 Date Format (Formato de fecha) 3.8.2 Date (Fecha) 1.800.561.8187 information@itm.com www.
Page 102: Date Format (Formato De Fecha)
Indicadores Defender 5000 ES-29 3.8.3 Date Format (Formato de fecha) 3.8.4 Time (Hora) 3.8.5 Project ID (Id. del proyecto) 3.8.6 Scale ID (Id. De la báscula) 3.8.7 Reset (Restablecer) 3.9 Communication (Comunicación) negrita 1.800.561.8187 information@itm.com www. .com...
Page 103: Rs232/2Nd Rs232 Configuration (Configuración Rs232 / 2º Rs232)
ES-30 Indicadores Defender 5000 3.9.1 RS232/2nd RS232 Configuration (Configuración RS232 / 2º RS232) Comunicación Opciones (valor predeterminado en negrita) 9600 8 Ninguno 1 bit Ninguno Demanda Solo estable Off, On (LFT fuerza On) «On» automático en estable RS232 / Modo Carga, Carga y cero 2º...
Page 104: Configuración De Impresión
Indicadores Defender 5000 ES-31 3.9.1.4 Handshake NONE = no hay intercambio 3.9.1.5 Comando alternativo de impresión 3.9.1.6 Comando alternativo de tara 3.9.1.7 Comando alternativo de cero 3.9.1.8 Restablecer 3.9.2 Configuración de impresión 3.9.2.1 Demanda Demanda Stable Only Nota: 3.9.2.2 «On» automático en estable «On»...
Page 105 ES-32 Indicadores Defender 5000 Nota: MT-Continuo Suma de verificación Off = deshabilitado 3.9.2.6 OH-Continuo OH-Continuo. Nota: OH-Continuo 3.9.2.7 SICS Nota: SICS 3.9.2.8 Báscula de referencia Nota: 3.9.2.9 Seleccionar plantilla Sencillo 3.9.2.10 Editar plantilla 1.800.561.8187 information@itm.com www. .com...
Page 106: Configuración De Rs485
Indicadores Defender 5000 ES-33 3.9.2.11 Editar cadena OHAUS 3.9.2.12 Restablecer 3.9.3 Configuración de RS485 ® RS232/RS485/interfaz USB para Defender 5000 3.9.4 Configuración de Ethernet ® Defender 5000. 1.800.561.8187 information@itm.com www. .com...
Page 107: Configuración De Wifi
ES-34 Indicadores Defender 5000 3.9.5 Configuración de Wifi 3.9.6 Configuración de Bluetooth Nota: 3.9.7 Configuración de Análoga 3.10 Configuración de mantenimiento 3.11 Configuración de la tecla de bloqueo Elemento Ajustes disponibles (ajuste predeterminado en negrita) Nota: 4. FUNCIONAMIENTO Mode 1.800.561.8187 information@itm.com www.
Page 108: Pesaje
Indicadores Defender 5000 ES-35 4.1 Pesaje Weighing Tare Zero 4.1.1 Configuración de la aplicación Configuration Configuración. A continuación se definen las configuraciones de pesaje negrita Elemento Ajustes disponibles Comentarios 4.1.2 Tara automática 4.1.3 Acumulación 1.800.561.8187 information@itm.com www. .com...
Page 109: Id. De Entrada
ES-36 Indicadores Defender 5000 Acumulación Nota: Acumular Manual Automático Ver los resultados de acumulación Accumulate Result Print 4.1.4 Id. de entrada 4.1.5 Configuración de Entrada/Salida (E/S) 1.800.561.8187 information@itm.com www. .com...
Page 110: Recuento
Indicadores Defender 5000 ES-37 negrita Elemento Ajustes disponibles Nota: Application Mode Weighing 4.2 Recuento Counting 4.2.1 Configurar el peso medio de las piezas (APW) 1.800.561.8187 information@itm.com www. .com...
Page 111 ES-38 Indicadores Defender 5000 Nota: Método 1 Método 2 Método 1 1.800.561.8187 information@itm.com www. .com...
Page 112: Configuración De La Aplicación
Indicadores Defender 5000 ES-39 Método 2 4.2.2 Configuración de la aplicación Configuration Configuración. 1.800.561.8187 information@itm.com www. .com...
Page 113: Acumulación
ES-40 Indicadores Defender 5000 negrita negrita 4.2.3 Acumulación 4.2.4 Configuración de Entrada/Salida (E/S) negrita Elemento Ajustes disponibles 1.800.561.8187 information@itm.com www. .com...
Page 114: Check (Comprobar)
Indicadores Defender 5000 ES-41 Nota: Application Mode Counting 4.3 Check (Comprobar) Check Check mode 4.3.1 Comprobación de peso (predeterminado) Check Check Weighing Under/Accept/Over Definición de límites por encima/por debajo Edit Limit negrita 1.800.561.8187 information@itm.com www. .com...
Page 115: Comprobación De Recuento
ES-42 Indicadores Defender 5000 negrita Comprobación de peso Modo comprobación de peso Off/ 4.3.2 Comprobación de recuento Under/Accept/Over Configurar el peso medio de las piezas (APW) Nota: Definición de límites por encima/por debajo Edit Limit Nota: 1.800.561.8187 information@itm.com www. .com...
Page 116: Configuración De La Aplicación
Indicadores Defender 5000 ES-43 4.3.3 Configuración de la aplicación Configuration Setup Configuration Menu 1.800.561.8187 information@itm.com www. .com...
Page 117: Configuración De Entrada/Salida (E/S)
ES-44 Indicadores Defender 5000 negrita negrita Pesaje Pesaje Aceptar Aceptar 4.3.4 Configuración de Entrada/Salida (E/S) negrita Elemento Ajustes disponibles Off, Off, Off, Off, 1.800.561.8187 information@itm.com www. .com...
Page 118: Pesaje Porcentual
Indicadores Defender 5000 ES-45 Nota: Application Mode Check Check 4.4 Pesaje porcentual Percent 4.4.1 Establecer un peso de referencia Método 1 1.800.561.8187 information@itm.com www. .com...
Page 119: Configuración De La Aplicación
ES-46 Indicadores Defender 5000 Método 2 Método 2 4.4.2 Configuración de la aplicación Configuration 1.800.561.8187 information@itm.com www. .com...
Page 120: Configuración De Entrada/Salida (E/S)
Indicadores Defender 5000 ES-47 A continuación se definen las configuraciones de porcentaje negrita negrita 4.4.3 Configuración de Entrada/Salida (E/S) negrita Elemento Ajustes disponibles Nota: Application Mode 1.800.561.8187 information@itm.com www. .com...
Page 121: Pesaje Dinámico
ES-48 Indicadores Defender 5000 Percent 4.5 Pesaje dinámico Manual Semi-automático Automático Dynamic 4.5.1 Configuración de la aplicación Configuration Menu 1.800.561.8187 information@itm.com www. .com...
Page 122 Indicadores Defender 5000 ES-49 A continuación se definen las configuraciones dinámicas negrita negrita Cuenta Cuenta regresiva: regresiva Manual Manual Semiautomático: Automático: Nota: 3.000 (con la unidad Si el tipo de operación es actual) Off/On Acumulación Off/manual/automático Manual: 1.800.561.8187 information@itm.com www. .com...
Page 123: Configuración De Tiempo Medio
ES-50 Indicadores Defender 5000 Automático: Tiempo de 1 ~ 10 s duración 4.5.2 Configuración de tiempo medio Nota: Método 1 Dynamic 1.800.561.8187 information@itm.com www. .com...
Page 124: Configuración De Entrada/Salida (E/S)
Indicadores Defender 5000 ES-51 Método 2 4.5.3 Configuración de Entrada/Salida (E/S) negrita Elemento Ajustes disponibles Nota: Application Mode Dynamic 1.800.561.8187 information@itm.com www. .com...
Page 125: Comunicación Serial
ES-52 Indicadores Defender 5000 5. COMUNICACIÓN SERIAL 5.1 Comandos de la interfaz Comandos de OHAUS Comando Función 1.800.561.8187 information@itm.com www. .com...
Page 126: Interfaz Rs232
Indicadores Defender 5000 ES-53 Comando Función 5.2 Interfaz RS232 5.3 Conectar a un ordenador New connection 5.4 Conectar a una impresora de serie 5.5 Impresiones Aplicación comprobación de peso: 1.800.561.8187 information@itm.com www. .com...
Page 127 ES-54 Indicadores Defender 5000 Campo Longitud Aplicación sin comprobación de peso: Campo Longitud Peso: Unidad: Estabilidad: T/N/G/PT: Estado de la aplicación (para comprobación): Caracteres de terminación: Nota: 1.800.561.8187 information@itm.com www. .com...
Page 128: Ejemplos De Impresión
Indicadores Defender 5000 ES-55 5.6 Ejemplos de impresión Configuración en el menú Imprimir 6. MICRO SD CARD Tarjeta SD Opciones ( Biblioteca Habilitado Memoria RS232 Usuario Nota: 6.1 Biblioteca Directorio y nombre de archivo Nombre de archivo Directorio Pesaje Biblioteca Recuento Comprobación Elementos de la biblioteca...
Page 129 ES-56 Indicadores Defender 5000 * Solo la biblioteca Checkcounting tiene el valor APW. Visualización de la biblioteca Acceder a la biblioteca Library Crear una nueva biblioteca 1.800.561.8187 information@itm.com www. .com...
Page 130 Indicadores Defender 5000 ES-57 Buscar biblioteca Nota: Recuperar biblioteca 1.800.561.8187 information@itm.com www. .com...
Page 131: Usuario
ES-58 Indicadores Defender 5000 Salga de la biblioteca 6.2 Usuario Inicio de sesión de usuario Perfil del usuario Directorio Usuario Introducir perfil de usuario Añada un Usuario nuevo 1.800.561.8187 information@itm.com www. .com...
Page 132 Indicadores Defender 5000 ES-59 Buscar usuario Edite y elimine un usuario 1.800.561.8187 information@itm.com www. .com...
Page 133 ES-60 Indicadores Defender 5000 Autoridad supervisora Regla de contraseña 1.800.561.8187 information@itm.com www. .com...
Page 134: Alibi
Indicadores Defender 5000 ES-61 6.3 Alibi la tarjeta SD no está instalada Alibi Memory Record 1.800.561.8187 information@itm.com www. .com...
Page 135: Indicadores Defender 5000
ES-62 Indicadores Defender 5000 6.4 Editable Editable Link to Link to RS232 RS232. 7. LEGAL PARA COMERCIO 7.1 Configuración 7.2 Comprobación 1.800.561.8187 information@itm.com www. .com...
Page 136: Sellado
Indicadores Defender 5000 ES-63 7.3 Sellado 8. MANTENIMIENTO PRECAUCIÓN: DESCONECTE EL EQUIPO DE LA FUENTE DE ALIMENTACIÓN ELÉCTRICA ANTES DE PROCEDER A SU LIMPIEZA. 8.1 Limpieza del modelo T52P 8.2 Limpieza del modelo TD52XW 1.800.561.8187 information@itm.com www. .com...
Page 137: Solución De Problemas
ES-64 Indicadores Defender 5000 8.3 Solución de problemas TABLA 8-1 SOLUCIÓN DE PROBLEMAS SÍNTOMA Causa probable SOLUCIÓN CAL E NO.SwW REF wWT Err 1.800.561.8187 information@itm.com www. .com...
Page 138: Datos Técnicos
Indicadores Defender 5000 ES-65 9. DATOS TÉCNICOS 9.1 Especificaciones Materiales Condiciones ambientales 1.800.561.8187 information@itm.com www. .com...
Page 139: Accesorios Y Opciones
ES-66 Indicadores Defender 5000 TABLA 9-1 ESPECIFICACIONES Modelo de Indicador TD52P TD52XW Resolución máxima de pantalla 1:75,000 Resolución máxima aprobada 1:10,000 Resolución máxima de recuento 1:1,500,000 Kilogramo, gramo, libra, onza, libra:onza, Tonne (Metric Tonne), Ton (Short Ton), Unidades de pesaje personalizada Pesaje básico, porcentual, recuento de piezas con APW optimizado, pesaje Modos de pesaje...
Page 140 Indicadores Defender 5000 ES-67 1.800.561.8187 information@itm.com www. .com...
Page 141: Esquemas Y Dimensiones
ES-68 Indicadores Defender 5000 9.3 Esquemas y dimensiones 1.800.561.8187 information@itm.com www. .com...
Page 142: Tabla De Valores Geo
Indicadores Defender 5000 ES-69 9.4 Tabla de valores Geo TABLA 9-4 CÓDIGOS GEO Elevation in meters 1300 1625 1950 2275 2600 2925 3250 1300 1625 1950 2275 2600 2925 3250 3575 Elevation in feet 1060 2130 3200 4260 5330 6400 7460 8530 9600...
Page 143: Conformidad
ES-70 Indicadores Defender 5000 10. CONFORMIDAD Notificación importante para instrumentos de pesaje verificados en la UE Nota de la FCC Declaración de Industry Canada Registro ISO 9001 1.800.561.8187 information@itm.com www. .com...
Page 144 Indicadores Defender 5000 ES-71 Eliminación del dispositivo 1.800.561.8187 information@itm.com www. .com...
Page 145: Anexos
ES-72 Indicadores Defender 5000 11. ANEXOS 11.1 Anexo A Salida continua estándar Tabla 5-1: Formato de salida continua estándar Notas del formato de salida continua: Tabla 5-2: Definiciones de bit del byte de estado A 1.800.561.8187 information@itm.com www. .com...
Page 146 Indicadores Defender 5000 ES-73 Table 5-3: Definiciones de bit del byte de estado B Table 5-4: Definiciones de bit del byte de estado C 1.800.561.8187 information@itm.com www. .com...
Page 147: Anexo B
ES-74 Indicadores Defender 5000 11.2 Anexo B Comandos MT-SICS 1.800.561.8187 information@itm.com www. .com...
Page 148: Garantía Limitada
Indicadores Defender 5000 ES-75 GARANTÍA LIMITADA 1.800.561.8187 information@itm.com www. .com...
Page 149 Indicateurs Defender 5000 FR-1 TABLE DES MATIERES 1. INTRODUCTION..........................5 1.1 Précautions 1.1.1 Précautions de sécurité de l’option relais 1.2 Aperçu des parties et des contrôles 1.3 Fonctions de contrôle 2. INSTALLATION..........................10 2.1 Désemballage 2.2 Connexions externes 2.2.1 Base d’échelle avec connecteur 2.2.2 Câble d’interface RS232 àTD52P 2.2.3 Alimentation AC au TD52P 2.2.4 Alimentation AC au TD52XW...
Page 150 FR-2 Defender 5000 Indicateurs 3.4.9 Comptoir de transaction 3.4.10 Réinitialiser 3.5 Readout Menu 3.5.1 Stabilité 3.5.2 Plage zéro 3.5.3 Niveau de filtre 3.5.4 Mise à zéro automatique 3.5.5 Auto Dim 3.5.6 Écran de veille 3.5.7 Arrêt auto 3.5.8 Régler le Contraste 3.5.9 Réinitialiser 3.6 I/O discret 3.7 Menu d’unité...
Page 151 Indicateurs Defender 5000 FR-3 3.10 Configuration de la maintenance 3.11 Configuration des touches de verrouillage 4. OPERATION............................. 35 4.1 Pesage 4.1.1 Réglage d’application 4.1.2 Auto Tare 4.1.3 Accumulation 4.1.4 ID d’entrée 4.1.5 Réglage d’entrée/de sortie (I/O) 4.2 Décompte 4.2.1 Régler le poids moyen des pièces (APW) 4.2.2 Réglage d’application 4.2.3 Accumulation 4.2.4 Réglage d’entrée/de sortie (I/O)
Page 152 FR-4 Defender 5000 Indicateurs 6.4 Modifiable 7. CERTIFIE POUR USAGE COMMERCIAL..................62 7.1 Réglages 7.2 Vérification 7.3 Scellement 8. ENTRETIEN ............................64 8.1 Nettoyage du modèle T52P 8.2 Nettoyage du modèle TD52XW 8.3 Dépannage 8.4 Renseignement sur le service 9. DONNÉES TECHNIQUES........................ 66 9.1 Spécifications 9.2 Accessoires et Options 9.3 Schémas et dimensions...
Page 153: Précautions De Sécurité De L'option Relais
Indicateurs Defender 5000 FR-5 1. INTRODUCTION 1.1 Précautions 1.1.1 Précautions de sécurité de l’option relais ATTENTION: RISQUE D’ELECTROCUTION. RETIRER TOUTES CONNEXIONS D’ALIMENTATION DE L’INDICATEUR AVANT LA MISE EN SERVICE OU D’EFFECTUER DES CONNEXIONS INTERNES. LE BOÎTIER DOIT ÊTRE UNIQUEMENT OUVERT PAR UN PERSONNEL QUALIFIÉ ET AUTORISÉ, NOTAMMENT UN TECHNICIEN ÉLECTRIQUE.
Page 154: Aperçu Des Parties Et Des Contrôles
FR-6 Defender 5000 Indicateurs 1.2 Aperçu des parties et des contrôles TABLEAU 1-1 TD52P PARTIES Élément Description 1.800.561.8187 information@itm.com www. .com...
Page 155: Aperçu Des Parties Et Des Contrôles (Suite)
Indicateurs Defender 5000 FR-7 1.2 Aperçu des parties et des contrôles (suite) TABLEAU 1-2 TD52XW PARTIES Élément Description 1.800.561.8187 information@itm.com www. .com...
Page 156 FR-8 Defender 5000 Indicateurs 1.2 Aperçu des parties et des contrôles (suite) TABLEAU 1-3 PRINCIPAL TABLEAU PC Élément Description 1.800.561.8187 information@itm.com www. .com...
Page 157: Fonctions De Contrôle
Indicateurs Defender 5000 FR-9 1.3 Fonctions de contrôle Bouton Action 1.800.561.8187 information@itm.com www. .com...
Page 158: Désemballage
FR-10 Defender 5000 Indicateurs 2. INSTALLATION 2.1 Désemballage 2.2 Connexions externes 2.2.1 Base d’échelle avec connecteur 2.2.2 Câble d’interface RS232 àTD52P Broche Connexion 2.2.3 Alimentation AC au TD52P 2.2.4 Alimentation AC au TD52XW 2.2.5 Alimentation de la batterie 1.800.561.8187 information@itm.com www.
Page 159: Ouverture Du Boîtier
Indicateurs Defender 5000 FR-11 2.3 Connexions externes 2.3.1 Ouverture du boîtier ATTENTION: RISQUE D’ELECTROCUTION. RETIRER TOUTES LES CONNEXIONS D’ALIMENTATION DE L’INDICATEUR AVANT LA MISE EN SERVICE OU D’EFFECTUER DES CONNEXIONS INTERNES. LE BOÎTIER DOIT ÊTRE UNIQUEMENT OUVERT PAR UN PERSONNEL QUALIFIÉ ET AUTORISÉ, NOTAMMENT UN TECHNICIEN ÉLECTRIQUE. TD52P TD52XW 2.3.2 Base d’échelle sans connecteur...
Page 160 FR-12 Defender 5000 Indicateurs Connexions de câblage de la carte mère Connexions de pontets 1.800.561.8187 information@itm.com www. .com...
Page 161 Indicateurs Defender 5000 FR-13 2.3.3 Câble d’interface RS232 àTD52XW 2.3.4 Installation de la carte MICRO SD 1.800.561.8187 information@itm.com www. .com...
Page 162: Orientation Du Boîtier Arrière Td52Xw
FR-14 Defender 5000 Indicateurs 2.4 Orientation du boîtier arrière TD52XW 2.5 Support de montage 1.800.561.8187 information@itm.com www. .com...
Page 163: Structure Du Menu
Indicateurs Defender 5000 FR-15 3. RÉGLAGES 3.1 Structure du menu TABLEAU 3-1 STRUCTURE DU MENU Mode Calibrage Réglage Lecture d’application Volume d’avertissement Transaction suivante Unité Communication 1.800.561.8187 information@itm.com www. .com...
Page 164 FR-16 Defender 5000 Indicateurs Unité Communication 1.800.561.8187 information@itm.com www. .com...
Page 165 Indicateurs Defender 5000 FR-17 Unité Communication Touche de verrouillage Carte SD Entretien REMARQUE 1.800.561.8187 information@itm.com www. .com...
Page 166: Navigation De Menu
FR-18 Defender 5000 Indicateurs 3.2 Navigation de menu Changement des réglages 1. Entrer dans le menu 2. Sélectionner le sous menu 3. Sélectionner l’élément du sous menu 4. Sélectionner le réglage 3.3 Menu de calibrage REMARQUE 3.3.1 Calibrage zéro 1.800.561.8187 information@itm.com www.
Page 167: Calibrage De Portée
Indicateurs Defender 5000 FR-19 Procédure de calibrage: 3.3.2 Calibrage de portée Remarque: Procédure de calibrage: 1.800.561.8187 information@itm.com www. .com...
Page 168: Calibrage De Linéarité
FR-20 Defender 5000 Indicateurs 3.3.3 Calibrage de linéarité Procédure de calibrage: 1.800.561.8187 information@itm.com www. .com...
Page 169: Réglage De Geo
Indicateurs Defender 5000 FR-21 3.3.4 Réglage de GEO Remarque: 1.800.561.8187 information@itm.com www. .com...
Page 170: Réglage De Menu
FR-22 Defender 5000 Indicateurs 3.4 Réglage de menu gras Réglage Options Capacité de l’unité Unique Plage >|1|< Capacité >|1|<Graduation >|2|< Capacité >|2|<Graduation Anglais Langue Alimentation zéro Marche Alimentation Unité Auto Bip de touche Marche Décompte de transaction Marche Transaction suivante 1-9999999 Réinitialiser 3.4.1 Capacité...
Page 171: Bip De Touche
Indicateurs Defender 5000 FR-23 Unique Double Double Unique 3.4.4 Graduation Unique Double Unique REMARQUE: 3.4.5 Langue English 3.4.6 Étalonnage du zéro Marche 3.4.7 Alimentation de l’unité Automatique 3.4.8 Bip de touche Marche 1.800.561.8187 information@itm.com www. .com...
Page 172: Comptoir De Transaction
FR-24 Defender 5000 Indicateurs 3.4.9 Comptoir de transaction Marche REMARQUE : 3.4.9.1 Transaction suivante 3.4.10 Réinitialiser REMARQUE: 3.5 Readout Menu gras Lecture Options Stabilité Plage zéro 100% Niveau de filtre Moyen Mise à zéro automatique 0,5d Rétro éclairage 1min Écran de veille 5min Arrêt auto Arrêt...
Page 173: Mise À Zéro Automatique
Indicateurs Defender 5000 FR-25 Moyen 3.5.4 Mise à zéro automatique 0,5division 3.5.5 Auto Dim 1 min 3.5.6 Écran de veille 5 min 3.5.7 Arrêt auto Arrêt 3.5.8 Régler le Contraste 3.5.9 Réinitialiser REMARQUE: 1.800.561.8187 information@itm.com www. .com...
Page 174 FR-26 Defender 5000 Indicateurs 3.6 I/O discret Activer Réinitialiser 1.800.561.8187 information@itm.com www. .com...
Page 175 Indicateurs Defender 5000 FR-27 Mode d’application & I/O Options discret Marche Arrêt, Arrêt, Pesage Arrêt Arrêt Arrêt Arrêt Marche Arrêt, Arrêt, Décompte Arrêt Arrêt Arrêt Arrêt Marche Arrêt, Arrêt, Arrêt Vérifier Arrêt Arrêt Arrêt Pourcent Marche Marche Arrêt, Arrêt, Dynamique Arrêt Arrêt Arrêt...
Page 176: Menu D'unité
FR-28 Defender 5000 Indicateurs 3.7 Menu d’unité gras REMARQUE: 3.7.1 Gramme (g) Marche 3.7.2 Kilogramme (kg) Marche 3.7.3 Pound (lb) Marche 3.7.4 Ounce (oz) Marche 3.7.5 Pound: Ounce (lb: oz) Marche 3.7.6 Tonne (Metric Tonne) Arrêt 3.7.7 Ton (Short Ton) Arrêt 3.7.8 Capacité...
Page 177: Menu Glp/Gmp
Indicateurs Defender 5000 FR-29 Exposant Chiffre le moins important (LSD) Remarque: 3.8 Menu GLP/GMP 3.8.1 Format de date 3.8.2 Date 3.8.3 Format de date 3.8.4 Heure 3.8.5 ID du projet 1.800.561.8187 information@itm.com www. .com...
Page 178 FR-30 Defender 5000 Indicateurs 3.8.6 ID de balance 3.8.6 Réinitialiser 3.9 Communication gras 3.9.1 Configuration RS232/2nd RS232 Communication Options (gras est par défaut) 9600 8 Aucun 1 bit Aucun Non/ Demande Stable Arrêt, Marche(LFT force uniquement uniquement) Stable auto en marche RS232/2 Mode Charge, Charge et zéro...
Page 179 Indicateurs Defender 5000 FR-31 3.9.1.1 Taux de bauds 9600 3.9.1.2 Parité 8 AUCUN = 8 données de bit, aucune parité 3.9.1.3 Bits d’arrêt 1 BIT 3.9.1.4 Salutation AUCUN = Pas de salutation 3.9.1.5 Commande d’impression alternatif 3.9.1.6 Commande de tare alternative 3.9.1.7 Commande de zéro alternatif 3.9.1.8 Réinitialiser 3.9.2 Réglage d’impression de RS232/2nd RS232...
Page 180 FR-32 Defender 5000 Indicateurs 3.9.2.3 Acceptation auto en marche Acceptation auto en marche Vérifier 3.9.2.4 Intervalle Intervalle Heure 3.9.2.5 MT-Continu MT-Continu MT-Continu. Remarque: MT-Continu Somme de contrôle Off =désactivée 3.9.2.6 OH-Continu OH-Continu OH-Continu. Remarque: OH-Continu 3.9.2.7 SICS ARRET Remarque: SICS 3.9.2.8 Balance de référence ARRET Remarque:...
Page 181: Modifier La Chaîne
Indicateurs Defender 5000 FR-33 de l’utilisateur Jusqu’à Jusqu’à Jusqu’à Jusqu’à 40 Non fixe, jusqu à 30 Jusqu’à 30 Non fixe, jusqu à 40 3.9.2.11 Modifier la chaîne OHAUS 3.9.2.12 Réinitialiser 1.800.561.8187 information@itm.com www. .com...
Page 182 FR-34 Defender 5000 Indicateurs 3.9.3 Configuration RS485 ® Defender 5000 RS232/RS485/Interface USB 3.9.4 Configuration Ethernet ® Defender 5000 3.9.5 Configuration Wifi ® Defender 5000 3.9.6 Configuration Bluetooth ® Defender 5000. Remarque : lorsque vous sélectionnez Bluetooth, la fenêtre du code PIN ne sera affichée que dans les modes de mesure.
Page 183: Réglage D'application
Indicateurs Defender 5000 FR-35 4. OPERATION Mode 4.1 Pesage Pesage 4.1.1 Réglage d’application Configuration Configuration Les configurations de pesage sont définis ci-dessous Gras Élément Réglages disponibles Commentaires Arrêt Arrêt 1.800.561.8187 information@itm.com www. .com...
Page 184 FR-36 Defender 5000 Indicateurs 4.1.2 Auto Tare 4.1.3 Accumulation Accumuler Remarque: Accumuler Manuel Automatique Visualisation des résultats de l’accumulation résultat accumuler Imprimer 1.800.561.8187 information@itm.com www. .com...
Page 185: Réglage D'entrée/De Sortie (I/O)
Indicateurs Defender 5000 FR-37 4.1.4 ID d’entrée 4.1.5 Réglage d’entrée/de sortie (I/O) Gras Élément Réglages disponibles Marche Arrêt, Arrêt, Arrêt Arrêt Arrêt Arrêt Remarque: mode d’application Pesage 1.800.561.8187 information@itm.com www. .com...
Page 186: Régler Le Poids Moyen Des Pièces (Apw)
FR-38 Defender 5000 Indicateurs 4.2 Décompte Décompte 4.2.1 Régler le poids moyen des pièces (APW) Remarque: Méthode 1: Méthode 2: 1.800.561.8187 information@itm.com www. .com...
Page 187 Indicateurs Defender 5000 FR-39 Méthode 1: Méthode 2: 4.2.2 Réglage d’application Configuration Configuration 1.800.561.8187 information@itm.com www. .com...
Page 188 FR-40 Defender 5000 Indicateurs Les configurations de décompte sont définis ci-dessous Gras gras Arrêt Éteint: Éteint/ Éteint: Marche Marche Marche Marche Marche Marche Marche Marche 4.2.3 Accumulation 4.2.4 Réglage d’entrée/de sortie (I/O) Gras Élément Réglages disponibles Marche Arrêt, Arrêt, Arrêt Arrêt Arrêt Arrêt...
Page 189: Vérifier Le Poids (Décompte)
Indicateurs Defender 5000 FR-41 Remarque: mode d’application Décompte 4.3 Vérifier Vérifier Mode Vérifier 4.3.1 Vérifier le poids (décompte) Vérifier vérifier le pesage Sous/Accepter/Sur Définition des limites sous/sur Modifier les Limites 1.800.561.8187 information@itm.com www. .com...
Page 190: Vérifier Le Décompte
FR-42 Defender 5000 Indicateurs Vérifier les configurations est défini ci-dessous Gras gras Vérifier le pesage Vérifier le mode de pesage Arrêt Éteint/ Arrêt Éteint/ Arrêt/ Éteint: 4.3.2 Vérifier le décompte Sous/Accepter/Sur Régler le poids moyen des pièces (APW) Remarque : Définition des limites sous/sur 1.800.561.8187 information@itm.com...
Page 191 Indicateurs Defender 5000 FR-43 Modifier les Limites Remarque: 4.3.3 Réglage d’application réglage de configuration Le menu de configuration 1.800.561.8187 information@itm.com www. .com...
Page 192 FR-44 Defender 5000 Indicateurs Vérifier les configurations est défini ci-dessous Gras gras Pesage Pesage: Arrêt Éteint: Arrêt Éteint: Arrêt/Sous et sur/Accepter/Sous/Sur Marche Marche Marche Marche Marche Marche 4.3.4 Réglage d’entrée/de sortie (I/O) Gras Élément Réglages disponibles Marche Arrêt, Arrêt, Arrêt, Arrêt, Arrêt, Arrêt,...
Page 193: Pesage En Pourcentage
Indicateurs Defender 5000 FR-45 Remarque: mode d’application Vérifier Vérifier 4.4 Pesage en pourcentage pourcentage 4.4.1 Établir un poids de référence Méthode 1: 1.800.561.8187 information@itm.com www. .com...
Page 194 FR-46 Defender 5000 Indicateurs Méthode 2: Méthode 3: 4.4.2 Réglage d’application Configuration 1.800.561.8187 information@itm.com www. .com...
Page 195 Indicateurs Defender 5000 FR-47 Vérifier les configurations est défini ci-dessous Gras gras Arrêt Éteint: Arrêt Éteint: 4.4.3 Réglage d’entrée/de sortie (I/O) Gras Élément Réglages disponibles Marche Remarque: mode d’application 1.800.561.8187 information@itm.com www. .com...
Page 196: Pesage Dynamique
FR-48 Defender 5000 Indicateurs Pourcent. 4.5 Pesage dynamique Semi-automatique Automatique Dynamique 4.5.1 Réglage d’application Configuration du menu 1.800.561.8187 information@itm.com www. .com...
Page 197 Indicateurs Defender 5000 FR-49 Les configurations dynamiques sont définies ci-dessous Gras gras Décompte Décompte Manuel/ Manuel Semi automatique: Automatique: Remarque: 3.000 (avec l'unité Si le type d opération est actuelle) Arrêt Éteint Accumuler Arrêt Éteint Manuel: 1.800.561.8187 information@itm.com www. .com...
Page 198: Réglage De L'heure Moyenne
FR-50 Defender 5000 Indicateurs Automatique: Remarque: Durée 1 ~ 10 s 4.5.2 Réglage de l’heure moyenne Remarque: Méthode 1: Dynamique 1.800.561.8187 information@itm.com www. .com...
Page 199 Indicateurs Defender 5000 FR-51 Méthode 2: 4.5.3 Réglage d’entrée/de sortie (I/O) Gras Élément Réglages disponibles Marche Arrêt, Arrêt, Arrêt, Arrêt, Arrêt, Arrêt, Remarque: mode d’application Dynamique 1.800.561.8187 information@itm.com www. .com...
Page 200: Communication Série
FR-52 Defender 5000 Indicateurs 5. COMMUNICATION SÉRIE 5.1 Interface de commande Commandes OHAUS 1.800.561.8187 information@itm.com www. .com...
Page 201: Connexion À Un Ordinateur
Indicateurs Defender 5000 FR-53 5.2 Interface RS232 Utiliser le port RS-232 5.3 Connexion à un ordinateur 5.4 Connexion à une imprimante en série 5.5 Impressions Vérifier l’application de poids: Champ Longueur Non vérification de l’application de poids: Champ Longueur 1.800.561.8187 information@itm.com www.
Page 202 FR-54 Defender 5000 Indicateurs Poids Unité Stabilité T/N/G/PT Statut d’application (pour vérification) Fin des caractères Remarque: 1.800.561.8187 information@itm.com www. .com...
Page 203: Exemples D'impression
Indicateurs Defender 5000 FR-55 5.6 Exemples d’impression Menu de réglage Impression 1.800.561.8187 information@itm.com www. .com...
Page 204: Carte Microsd
FR-56 Defender 5000 Indicateurs 6. CARTE MICRO SD Carte SD Options( Bibliothèque Activée Mémoire RS232 Utilisateur Remarque: 6.1 Librairie Nom du fichier et répertoire Nom du fichier Répertoire Pesage Librairie Décompte Vérifier Éléments de la librairie * Seule la bibliothèque CheckCounting a la valeur APW. Affichage de la bibliothèque 1.800.561.8187 information@itm.com...
Page 205 Indicateurs Defender 5000 FR-57 Entrer la librairie Librairie Créer une nouvelle librairie Rechercher la librairie 1.800.561.8187 information@itm.com www. .com...
Page 206: Utilisateur
FR-58 Defender 5000 Indicateurs Remarque : Rappeler la librairie Quitter la bibliothèque 6.2 Utilisateur Utilisateur en ligne Profil de l'utilisateur 1.800.561.8187 information@itm.com www. .com...
Page 207 Indicateurs Defender 5000 FR-59 Répertoire Utilisateur Ajouter un nouvel utilisateur Ajouter un nouvel utilisateur Rechercher un utilisateur 1.800.561.8187 information@itm.com www. .com...
Page 208 FR-60 Defender 5000 Indicateurs Modifier et supprimer un utilisateur Autorité de surveillance 1.800.561.8187 information@itm.com www. .com...
Page 209 Indicateurs Defender 5000 FR-61 Mot de passe 6.3 Alibi Carte SD non installée) Marche Enregistrement de mémoire Alibi 1.800.561.8187 information@itm.com www. .com...
Page 210: Certifie Pour Usage Commercial
FR-62 Defender 5000 Indicateurs 6.4 Modifiable Modifiable Lier à Lien à RS232 RS232 7. CERTIFIE POUR USAGE COMMERCIAL 7.1 Réglages 1.800.561.8187 information@itm.com www. .com...
Page 211 Indicateurs Defender 5000 FR-63 7.2 Vérification 7.3 Scellement 1.800.561.8187 information@itm.com www. .com...
Page 212: Entretien
FR-64 Defender 5000 Indicateurs 8. ENTRETIEN ATTENTION: DÉCONNECTER LA BALANCE DE L’ALIMENTATION AVANT LE NETTOYAGE. 8.1 Nettoyage du modèle T52P 8.2 Nettoyage du modèle TD52XW 8.3 Dépannage TABLEAU 8-1 DEPANNAGE SYMPTÔME CAUSES PROBABLES SOLUTION 1.800.561.8187 information@itm.com www. .com...
Page 213: Renseignement Sur Le Service
Indicateurs Defender 5000 FR-65 SYMPTÔME CAUSES PROBABLES SOLUTION 8.4 Renseignement sur le service 1.800.561.8187 information@itm.com www. .com...
Page 214: Données Techniques
FR-66 Defender 5000 Indicateurs 9. DONNÉES TECHNIQUES 9.1 Spécifications Matériels Conditions ambiantes Tableau 9-1 SPECIFICATIONS Modèle de l’indicateur TD52P TD52XW Résolution maximale affichée 1:75,000 Résolution maximale approuvée 1:10,000 Résolution maximale de décompte 1:1,500,000 Kilogramme, Gramme, Pound, Ounce, Pound: Ounce, Tonne (Metric Tonne), (Short Unités de pesage Ton), Custom Pesage de base, pesage de pourcentage, décompte de pièce avec APW optimisé,...
Page 215: Accessoires Et Options
Indicateurs Defender 5000 FR-67 9.2 Accessoires et Options TABLEAU 9-2 OPTIONS Description 1.800.561.8187 information@itm.com www. .com...
Page 216: Schémas Et Dimensions
FR-68 Defender 5000 Indicateurs 9.3 Schémas et dimensions 1.800.561.8187 information@itm.com www. .com...
Page 217 Indicateurs Defender 5000 FR-69 9.4 Tableau des valeurs Géo TABLEAU 9-4 TABLEAU DES VALEURS GEO Elevation in meters 1300 1625 1950 2275 2600 2925 3250 1300 1625 1950 2275 2600 2925 3250 3575 Elevation in feet 1060 2130 3200 4260 5330 6400 7460...
Page 218 FR-70 Defender 5000 Indicateurs 10. CONFORMITE Remarque importante pour les instruments de pesage vérifiés dans l’UE Note FCC Note industrielle concernant le Canada Enregistrement ISO 9001 1.800.561.8187 information@itm.com www. .com...
Page 219 Indicateurs Defender 5000 FR-71 Mise au rebut 1.800.561.8187 information@itm.com www. .com...
Page 220 FR-72 Defender 5000 Indicateurs 11. ANNEXES 11.1 Annexe A Sortie en continu standard Remarques sur les formats de sortie en continu : 1.800.561.8187 information@itm.com www. .com...
Page 221 Indicateurs Defender 5000 FR-73 1.800.561.8187 information@itm.com www. .com...
Page 222 FR-74 Defender 5000 Indicateurs 11.2 Annexe B Commandes MT-SICS 1.800.561.8187 information@itm.com www. .com...
Page 223: Garantie Limitée
Indicateurs Defender 5000 FR-75 GARANTIE LIMITÉE 1.800.561.8187 information@itm.com www. .com...
Page 224 Defender 5000 Indikatoren DE-1 INHALTSVERZEICHNIS 1. EINLEITUNG ............................5 1.1 Sicherheitsvorkehrungen 1.1.1 Sicherheitsvorkehrungen für die Relaisoption 1.2 Überblick über Teile und Bedienelemente 1.3 Steuerfunktionen 2. INSTALLATION..........................10 2.1 Auspacken 2.2 Externe Verbindungen 2.2.1 Waagensockel mit Stecker 2.2.2 RS232-Schnittstelle Kabel zum TD52P 2.2.3 Wechselstrom an TD52P 2.2.4 Wechselstrom an TD52XW 2.2.5 Batterieleistung 2.3 Interne Verbindungen...
Page 225 DE-2 Defender 5000 Indikatoren 3.4.9 Transaktionszähler 3.4.10 Zurücksetzen 3.5 Ablesemenü 3.5.1 Stabilität 3.5.2 Nullbereich 3.5.3 Filterebene 3.5.4 Auto Zero Tracking 3.5.5 Auto Dim 3.5.6 Bildschirmschoner 3.5.7 Auto Off 3.5.8 Kontrast anpassen 3.5.9 Zurücksetzen 3.6 Discrete I/O 3.7 Wiegeeinheit 3.7.1 Gramm (g) 3.7.2 Kilogramm (kg) 3.7.3 Pfund (lb) 3.7.4 Unze (oz)
Page 226 Defender 5000 Indikatoren DE-3 3.10Wartungskonfiguration 3.11 Konfiguration der Sperrtaste 4. BETRIEB ............................34 Wiegung 4.1.1 Anwendungseinstellung 4.1.2 Auto Tara 4.1.3 Kumulation 4.1.4 ID-Eingabe 4.1.5 Input/Output (I/O)-Einstellung Zählung 4.2.1 Stellen Sie das durchschnittliche Stückgewicht (APW) ein. 4.2.2 Anwendungseinstellung 4.2.3 Kumulation 4.2.4 Input/Output (I/O)-Einstellung Prüfen 4.3.1 Kontrollwiegung (Standard)
Page 227 DE-4 Defender 5000 Indikatoren 6.4 Bearbeitbar 7. EICHPFLICHTIGE ANWENDUNG....................62 7.1 Einstellungen 7.2 Verifizierung 7.3 Versiegelung 8. WARTUNG .............................63 8.1 Modell T52P Reinigung 8.2 Modell TD52XW Reinigung 8.3 Fehlerbehebung 8.4 Serviceinformationen 9. TECHNISCHE DATEN ........................65 9.1 Spezifikationen 9.2 Zubehör und Optionen 9.3 Zeichnungen und Abmessungen 9.4 Tabelle der Geowerte 10.
Page 228: Einleitung
Defender 5000 Indikatoren DE-5 1. EINLEITUNG 1.1 Sicherheitsvorkehrungen 1.1.1 Sicherheitsvorkehrungen für die Relaisoption VORSICHT: STROMSCHLAGGEFAHR. ENTFERNEN ALLE STROMANSCHLÜSSE ZUM INDIKATOR VOR INSTANDHALTUNGSARBEITEN ODER VOR DER INSTALLATION VON INTERNEN ANSCHLÜSSEN. DAS GEHÄUSE SOLLTE AUTORISIERTEM QUALIFIZIERTEM PERSONAL, WIE Z. B. EINEM ELEKTROTECHNIKER, GEÖFFNET WERDEN. ON/CLR Off 1.800.561.8187 information@itm.com...
Page 229: Überblick Über Teile Und Bedienelemente
DE-6 Defender 5000 Indikatoren 1.2 Überblick über Teile und Bedienelemente TABELLE 1-1 TD52P-TEILE Artikel Beschreibung 1.800.561.8187 information@itm.com www. .com...
Page 230 Defender 5000 Indikatoren DE-7 1.2 Überblick über Teile und Bedienelemente (Forts.) TABELLE 1-2 TD52XW-TEILE Artikel Beschreibung 1.800.561.8187 information@itm.com www. .com...
Page 231 DE-8 Defender 5000 Indikatoren 1.2 Überblick über Teile und Bedienelemente (Forts.) TABELLE 1-3 Hauptplatine Artikel Beschreibung 1.800.561.8187 information@itm.com www. .com...
Page 232: Steuerfunktionen
Defender 5000 Indikatoren DE-9 1.3 Steuerfunktionen Taste Aktion 1.800.561.8187 information@itm.com www. .com...
Page 233: Installation
DE-10 Defender 5000 Indikatoren 2. INSTALLATION 2.1 Auspacken 2.2 Externe Verbindungen 2.2.1 Waagensockel mit Stecker 2.2.2 RS232-Schnittstelle Kabel zum TD52P Stift Verbindung 2.2.3 Wechselstrom an TD52P 2.2.4 Wechselstrom an TD52XW 2.2.5 Batterieleistung 1.800.561.8187 information@itm.com www. .com...
Page 234: Interne Verbindungen
Defender 5000 Indikatoren DE-11 2.3 Interne Verbindungen 2.3.1 Öffnen des Gehäuses VORSICHT: STROMSCHLAGGEFAHR. ENTFERNEN ALLE STROMANSCHLÜSSE ZUR ANZEIGE, BEVOR SIE INTERNE ANSCHLÜSSE WARTEN ODER ERSTELLEN. GEHÄUSE SOLLTE AUTORISIERTEM QUALIFIZIERTEM PERSONAL, EINEM ELEKTROTECHNIKER, GEÖFFNET WERDEN. TD52P TD52XW 2.3.2 Waagensockel ohne Stecker Entfernung des vorinstallierten Wiegezellensteckers und Kabelbaums.
Page 235 DE-12 Defender 5000 Indikatoren Installation von Kabeln und Anschlüssen Verdrahtungsanschlüsse der Hauptplatine Jumperverbindungen 1.800.561.8187 information@itm.com www. .com...
Page 236: Rs232-Schnittstellenkabel Zum Td52Xw
Defender 5000 Indikatoren DE-13 2.3.3 RS232-Schnittstellenkabel zum TD52XW 2.3.4 Installation der MICRO SD-Karte 1.800.561.8187 information@itm.com www. .com...
Page 237: Ausrichtung Des Hinteren Td52Xw-Gehäuses
DE-14 Defender 5000 Indikatoren 2.4 Ausrichtung des hinteren TD52XW-Gehäuses 2.5 Montagehalterung 1.800.561.8187 information@itm.com www. .com...
Page 238: Einstellungen
Defender 5000 Indikatoren DE-15 3. EINSTELLUNGEN 3.1 Menüstruktur TABELLE 3-1 MENÜSTRUKTUR Kalibrierung Konfiguration Ablesung Anwendungsmodus Piepstonlautstärke Nächste Transaktion Einheit Kommunikation 1.800.561.8187 information@itm.com www. .com...
Page 239 DE-16 Defender 5000 Indikatoren Einheit Kommunikation 1.800.561.8187 information@itm.com www. .com...
Page 240: Menünavigation
Defender 5000 Indikatoren DE-17 Einheit Kommunikation Sperrtaste SD-Karte Wartung ANMERKUNG: 3.2 Menünavigation Einstellungen ändern 1. Menü aufrufen 2. Untermenü auswählen 1.800.561.8187 information@itm.com www. .com...
Page 241: Kalibrierungsmenü
DE-18 Defender 5000 Indikatoren 3. Untermenüpunkt auswählen 4. Einstellung auswählen 3.3 Kalibrierungsmenü ANMERKUNGEN 3.3.1 Nullkalibrierung Kalibrierverfahren: 1.800.561.8187 information@itm.com www. .com...
Page 242: Spannenkalibrierung
Defender 5000 Indikatoren DE-19 3.3.2 Spannenkalibrierung Hinweis: Kalibrierungsverfahren: 1.800.561.8187 information@itm.com www. .com...
Page 243: Linearitätskalibrierung
DE-20 Defender 5000 Indikatoren 3.3.3 Linearitätskalibrierung Kalibrierungsverfahren: 1.800.561.8187 information@itm.com www. .com...
Page 244: Geo-Anpassung
Defender 5000 Indikatoren DE-21 3.3.4 GEO-Anpassung Hinweis: 3.4 Konfigurationsmenü fett 1.800.561.8187 information@itm.com www. .com...
Page 245: Kapazitätseinheit
DE-22 Defender 5000 Indikatoren Konfiguration Optionen Kapazitätseinheit Einzel Bereich >|1|< Kapazität >|1|<Graduierung >|2|< Kapazität >|2|<Graduierung Englisch Sprache Power On Zero Power On Unit Auto Tastenpiepston Transaktionszähler Nächste Transaktion 1-9999999 Zurücksetzen 3.4.1 Kapazitätseinheit 3.4.2 Reichweite Einzel- Dual 3.4.3 Kapazität 1.800.561.8187 information@itm.com www.
Page 246: Graduierung
Defender 5000 Indikatoren DE-23 Einzel- Dual- Dual- Einzel- 3.4.4 Graduierung Einzel- Dual- Einzel- HINWEIS: 3.4.5 Sprache English 3.4.6 Power On Zero 3.4.7 Power On Unit Automatisch 1.800.561.8187 information@itm.com www. .com...
Page 247: Tastenton
DE-24 Defender 5000 Indikatoren 3.4.8 Tastenton 3.4.9 Transaktionszähler ANMERKUNG: 3.4.9.1 Nächste Transaktion 3.4.10 Zurücksetzen HINWEIS: 3.5 Ablesemenü fett Ablesung Optionen Stabilität Nullbereich 100% Filterebene Mittel Auto Nulllinie 0,5d Hintergrundbeleuchtung 1min Bildschirmschoner 5min Auto Off Kontrast anpassen Zurücksetzen 3.5.1 Stabilität 1.800.561.8187 information@itm.com www.
Page 248: Filterebene
Defender 5000 Indikatoren DE-25 3.5.2 Nullbereich 100% HINWEIS: 3.5.3 Filterebene Mittel 3.5.4 Auto Zero Tracking 0,5d 3.5.5 Auto Dim 1 min 3.5.6 Bildschirmschoner 5 Minuten 3.5.7 Auto Off 1.800.561.8187 information@itm.com www. .com...
Page 249: Kontrast Anpassen
DE-26 Defender 5000 Indikatoren 3.5.8 Kontrast anpassen 3.5.9 Zurücksetzen HINWEIS: 3.6 Discrete I/O Aktivieren Zurücksetzen Anwendungsmodus Optionen & Discrete I/O Wiegung 1.800.561.8187 information@itm.com www. .com...
Page 250: Wiegeeinheit
Defender 5000 Indikatoren DE-27 Anwendungsmodus Optionen & Discrete I/O Zählung Markieren Prozent Dynamisch 3.7 Wiegeeinheit Fett HINWEIS: 3.7.1 Gramm (g) 3.7.2 Kilogramm (kg) 1.800.561.8187 information@itm.com www. .com...
Page 251: Pfund (Lb)
DE-28 Defender 5000 Indikatoren 3.7.3 Pfund (lb) 3.7.4 Unze (oz) 3.7.5 Pfund: Unze (lb: oz) 3.7.6 Tonne (Metric Tonne) 3.7.7 Ton (Short Ton) 3.7.8 Benutzerdefinierte Einheit (c) Faktor Exponent Least Signific Digit (LSD) 1.800.561.8187 information@itm.com www. .com...
Page 252: Glp/Gmp-Menü
Defender 5000 Indikatoren DE-29 Hinweis: 3.8 GLP/GMP-Menü 3.8.1 Datumsformat 3.8.2 Datum 3.8.3 Zeitformat 3.8.4 Uhrzeit 3.8.5 Projekt-ID 3.8.6 Maßstabs-ID 3.8.7 Zurücksetzen 3.9 Kommunikation 1.800.561.8187 information@itm.com www. .com...
Page 253: Kommunikation
DE-30 Defender 5000 Indikatoren Fett 3.9.1 RS232 / 2. RS232-Konfiguration Kommunikation Optionen (Fett ist Standard) 9600 8 keine 1 Bit Keiner Aufforderung Nur stabil Off, On(LFT Force On) Auto On Stable Modus Last, Last und Null RS232/2 RS232 Auto On Accept Intervall Zeit 1~50000...
Page 254: Druckeinstellung Von Rs232 / 2. Rs232
Defender 5000 Indikatoren DE-31 8 NONE = 8 Datenbits, keine Parität 3.9.1.3 Stoppbits 1 BIT 3.9.1.4 Handshake NONE = kein Handshake 3.9.1.5 Alternativer Druckbefehl 3.9.1.6 Alternativer Tara-Befehl 3.9.1.7 Alternativer Nullbefehl 3.9.1.8 Zurücksetzen 3.9.2 Druckeinstellung von RS232 / 2. RS232 3.9.2.1 Forderung Forderung Nur stabil Hinweis:...
Page 255 DE-32 Defender 5000 Indikatoren 3.9.2.5 MT-Continuous MT-Continuous MT-Continuous Hinweis: MT-Continuous Prüfsumme Aus = deaktiviert 3.9.2.6 OH-Continuous OH-Continuous OH-Continuous Hinweis: OH-Continuous 3.9.2.7 SICS Hinweis: SICS 3.9.2.8 Referenzwaage Hinweis: 3.9.2.9 Vorlage auswählen Simple 3.9.2.10 Vorlage bearbeiten 1.800.561.8187 information@itm.com www. .com...
Page 256: Rs485-Konfiguration
Defender 5000 Indikatoren DE-33 Bis zu Bis zu Bis zu Bis 40 Nicht festgelegt, bis zu 30 Bis zu 30 Nicht festgelegt, bis zu 40 3.9.2.11 Zeichenfolge bearbeiten OHAUS 3.9.2.12 Zurücksetzen 3.9.3 RS485-Konfiguration ® Defender 5000 RS232/RS485/USB-Schnittstelle 3.9.4 Ethernet-Konfiguration ® Defender 5000 Ethernet-Schnittstelle 3.9.5 Wifi-Konfiguration...
Page 257: Bluetooth-Konfiguration
DE-34 Defender 5000 Indikatoren 3.9.6 Bluetooth-Konfiguration ® Defender 5000 USB Host Anmerkung: 3.9.7 Analog-Konfiguration ® Defender 5000 Analog Kit 3.10Wartungskonfiguration 3.11 Konfiguration der Sperrtaste Position Verfügbare Einstellungen (die Standardeinstellungensindfett gedruckt) Nein Anmerkung: 4. BETRIEB Modus 1.800.561.8187 information@itm.com www. .com...
Page 258: Wiegung
Defender 5000 Indikatoren DE-35 4.1 Wiegung Wiegen Tara Null 4.1.1 Anwendungseinstellung entspricht, um die Konfiguration- Die Wiegungskonfigurationen sind unten definiert (Standardwerte in Artikel Verfügbare Einstellungen Kommentare 4.1.2 Auto Tara 4.1.3 Kumulation Kumulation 1.800.561.8187 information@itm.com www. .com...
Page 259: Id-Eingabe
DE-36 Defender 5000 Indikatoren Hinweis: Kumulation Manuell Automatisch Ansicht der Kumulationsergebnisse Kumulationsergebnis Drucken 4.1.4 ID-Eingabe 4.1.5 Input/Output (I/O)-Einstellung Fettdruck Artikel Verfügbare Einstellungen Off, 1.800.561.8187 information@itm.com www. .com...
Page 260: Zählung
Defender 5000 Indikatoren DE-37 Off, Off, Off, Off, Off, Hinweis: Anwendungsmodus Wiegung 4.2 Zählung Zählung 4.2.1 Stellen Sie das durchschnittliche Stückgewicht (APW) ein. Hinweis: 1.800.561.8187 information@itm.com www. .com...
Page 261 DE-38 Defender 5000 Indikatoren Methode 1 Methode 2 Methode 1 Methode 2 1.800.561.8187 information@itm.com www. .com...
Page 262: Anwendungseinstellung
Defender 5000 Indikatoren DE-39 4.2.2 Anwendungseinstellung Konfiguration Konfiguration entspricht. Fettdruck 1.800.561.8187 information@itm.com www. .com...
Page 263: Kumulation
DE-40 Defender 5000 Indikatoren Fettdruck 4.2.3 Kumulation 4.2.4 Input/Output (I/O)-Einstellung Fettdruck). Artikel Verfügbare Einstellungen Off, Off, Off, Off, Off, Off, Hinweis: 1.800.561.8187 information@itm.com www. .com...
Page 264: Prüfen
Defender 5000 Indikatoren DE-41 Anwendungsmodus Zählung 4.3 Prüfen Prüfen Prüfen-Modus 4.3.1 Kontrollwiegung (Standard) Prüfen Wiegung prüfen Unter/Akzeptieren/Über Definition von Über-/Untergrenzen Grenze bearbeiten Fettdruck 1.800.561.8187 information@itm.com www. .com...
Page 265: Zählung Prüfen
DE-42 Defender 5000 Indikatoren Fettdruck Überprüfen Sie die Prüfen Sie den Wiegungsmodus Gewichtung Off/ 4.3.2 Zählung prüfen Unter/Akzeptieren/Übernehmen Stellen Sie das durchschnittliche Stückgewicht (APW) ein. Hinweis: Definition von Über-/Untergrenzen 1.800.561.8187 information@itm.com www. .com...
Page 266: Anwendungseinstellung
Defender 5000 Indikatoren DE-43 Grenze bearbeiten Hinweis: 4.3.3 Anwendungseinstellung entspricht, um die Konfigurationsmenü Fettdruck 1.800.561.8187 information@itm.com www. .com...
Page 267: Input/Output (I/O)-Einstellung
DE-44 Defender 5000 Indikatoren Fettdruck Weighting Weighing Akzeptieren Akzeptieren 4.3.4 Input/Output (I/O)-Einstellung Fettdruck). Artikel Verfügbare Einstellungen Off, Off, Off/ Off/ Off/ Off/ 1.800.561.8187 information@itm.com www. .com...
Page 268: Prozentwiegung
Defender 5000 Indikatoren DE-45 Hinweis: Anwendungsmodus Prüfen Prüfen 4.4 Prozentwiegung Prozent 4.4.1 Erstellung eines Referenzgewichts Methode 1 1.800.561.8187 information@itm.com www. .com...
Page 269: Anwendungseinstellung
DE-46 Defender 5000 Indikatoren Methode 2 Methode 2 4.4.2 Anwendungseinstellung Konfiguration Die Prozentkonfigurationen sind unten definiert (Standardwerte in 1.800.561.8187 information@itm.com www. .com...
Page 270: Input/Output (I/O)-Einstellung
Defender 5000 Indikatoren DE-47 Fettdruck 4.4.3 Input/Output (I/O)-Einstellung Fettdruck). Artikel Verfügbare Einstellungen Hinweis: Anwendungsmodus Prozent 1.800.561.8187 information@itm.com www. .com...
Page 271: Dynamisches Wiegung
DE-48 Defender 5000 Indikatoren 4.5 Dynamisches Wiegung Manuell Halbautomatisch Automatisch Dynamisch 4.5.1 Anwendungseinstellung Konfigurationsmenü 1.800.561.8187 information@itm.com www. .com...
Page 272 Defender 5000 Indikatoren DE-49 Die Dynamische Konfigurationen sind unten definiert Fettdruck Fettdruck Countdown Countdown Manuell Handbuch Halbautomatisch: Automatisch: Hinweis: 3.000 (mit der aktuellen Halbautomatisch/ Einheit) Automatisch Manuell: 1.800.561.8187 information@itm.com www. .com...
Page 273: Durchschnittliche Zeiteinstellung
DE-50 Defender 5000 Indikatoren Fettdruck Automatisch: Hinweis: 4.5.2 Durchschnittliche Zeiteinstellung Hinweis: Methode 1 Dynamisch 1.800.561.8187 information@itm.com www. .com...
Page 274: Input/Output (I/O)-Einstellung
Defender 5000 Indikatoren DE-51 Methode 2 4.5.3 Input/Output (I/O)-Einstellung Fettdruck). Artikel Verfügbare Einstellungen Off, Off, Off, Off, Off, Off, Hinweis: Anwendungsmodus Dynamisch 1.800.561.8187 information@itm.com www. .com...
Page 275: Serielle Kommunikation
DE-52 Defender 5000 Indikatoren 5. SERIELLE KOMMUNIKATION 5.1 Schnittstellenbefehl OHAUS Befehle 1.800.561.8187 information@itm.com www. .com...
Page 276: Rs232 Schnittstelle
Defender 5000 Indikatoren DE-53 5.2 RS232 Schnittstelle 5.3 Verbindung mit einem Computer 5.4 Verbindung mit einem seriellen Drucker 5.5 Ausdrucke Wiegeanwendung mit Prüfung Feld Länge Wiegeanwendung ohne Prüfung Feld Länge 1.800.561.8187 information@itm.com www. .com...
Page 277: Ausdruckbeispiele
DE-54 Defender 5000 Indikatoren Gewicht Einheit Stabilität T/N/B/PT Anwendungsstatus (zum Prüfen) Abschlusszeichen Hinweis: 5.6 Ausdruckbeispiele Konfiguration im Menü Ausdruck 1.800.561.8187 information@itm.com www. .com...
Page 278: Micro Sd-Karte
Defender 5000 Indikatoren DE-55 6. MICRO SD-KARTE Hinweis: SD-Karte Optionen( Bibliothek Enable Speicher RS232 Nutzer 6.1 Bibliothek Dateiname und Verzeichnis Dateiname Verzeichnis Wiegung Bibliothek Zählung Prüfen Bibliotheksobjekte * Nur die Checkcounting-Bibliothek hat den APW-Wert. 1.800.561.8187 information@itm.com www. .com...
Page 279 DE-56 Defender 5000 Indikatoren Bibliotheksansicht Bibliothek betreten Bibliothek Erstellen Sie eine neue Bibliothek Suche Bibliothek 1.800.561.8187 information@itm.com www. .com...
Page 280 Defender 5000 Indikatoren DE-57 Abruf Bibliothek Bibliothek verlassen 6.2 User Benutzer-Anmeldung 1.800.561.8187 information@itm.com www. .com...
Page 281 DE-58 Defender 5000 Indikatoren Benutzerprofil Verzeichnis Benutzer Benutzerprofil eingeben Neuen Nutzer hinzufügen 1.800.561.8187 information@itm.com www. .com...
Page 282 Defender 5000 Indikatoren DE-59 Einen Benutzer suchen Bearbeiten und Löschen eines Benutzers 1.800.561.8187 information@itm.com www. .com...
Page 283 DE-60 Defender 5000 Indikatoren Aufsichtsbehörde Passwort-Regel 6.3 Alibi SD-Karte ist nicht installiert) Alibi- Speicheraufzeichnung 1.800.561.8187 information@itm.com www. .com...
Page 284: Bearbeitbar
Defender 5000 Indikatoren DE-61 6.4 Bearbeitbar Bearbeitbar Link zu Link zu' RS232 RS232. 1.800.561.8187 information@itm.com www. .com...
Page 285: Eichpflichtige Anwendung
DE-62 Defender 5000 Indikatoren 7. EICHPFLICHTIGE ANWENDUNG 7.1 Einstellungen 7.2 Verifizierung 7.3 Versiegelung 1.800.561.8187 information@itm.com www. .com...
Page 286: Wartung
Defender 5000 Indikatoren DE-63 8. WARTUNG VORSICHT: TRENNEN SIE DAS GERÄT VOR DER REINIGUNG VON DER STROMVERSORGUNG. 8.1 Modell T52P Reinigung 8.2 Modell TD52XW Reinigung 1.800.561.8187 information@itm.com www. .com...
Page 287: Fehlerbehebung
DE-64 Defender 5000 Indikatoren 8.3 Fehlerbehebung TABELLE 8-1 FEHLERBEHEBUNG SYMPTOM WAHRSCHEINLICHE ABHILFE URSACHE(N) 1.800.561.8187 information@itm.com www. .com...
Page 288: Technische Daten
Defender 5000 Indikatoren DE-65 9. TECHNISCHE DATEN 9.1 Spezifikationen Materialien Umgebungsbedingungen TABELLE 9-1 SPEZIFIKATIONEN Anzeigemodell TD52P TD52XW Maximale angezeigte Auflösung 1:75.000 Maximale zulässige Auflösung 1:10.000 Maximale Zählauflösung 1:1,500,000 Kilogramm, Gramm, Pfund, Unze, Pfund:Unze, Tonne (Metric Tonne), Wiegeeinheiten Ton (Short Ton), Benutzerdefiniert Basiswiegen, Prozentwiegen, Stückzählen mit optimierter APW, Tierwiegen / Wiegemodi Dynamisches Wiegen, Kontrollwiegen...
Page 289: Zubehör Und Optionen
DE-66 Defender 5000 Indikatoren 9.2 Zubehör und Optionen TABELLE 9-2 OPTIONEN Beschreibung 1.800.561.8187 information@itm.com www. .com...
Page 290: Zeichnungen Und Abmessungen
Defender 5000 Indikatoren DE-67 9.3 Zeichnungen und Abmessungen 1.800.561.8187 information@itm.com www. .com...
Page 291: Tabelle Der Geowerte
DE-68 Defender 5000 Indikatoren 9.4 Tabelle der Geowerte TABELLE 9-4 GEO-CODES Elevation in meters 1300 1625 1950 2275 2600 2925 3250 1300 1625 1950 2275 2600 2925 3250 3575 Elevation in feet 1060 2130 3200 4260 5330 6400 7460 8530 9600 10660 1060...
Page 292: Einhaltung
Defender 5000 Indikatoren DE-69 10. EINHALTUNG Wichtiger Hinweis für verifizierte Waagen in der EU FCC-Note Industry Canada Note ISO 9001-Registrierung 1.800.561.8187 information@itm.com www. .com...
Page 293 DE-70 Defender 5000 Indikatoren Entsorgung 1.800.561.8187 information@itm.com www. .com...
Page 294: Anhänge
Defender 5000 Indikatoren DE-71 11. ANHÄNGE 11.1 Anhang A Standardmäßige kontinuierliche Ausgabe Tabelle 5-1: Kontinuierliches Standardausgabeformat Hinweise zum kontinuierlichen Ausgabeformat: Tabelle 5-2: Bitdefinitionen für Statusbyte A 1.800.561.8187 information@itm.com www. .com...
Page 295 DE-72 Defender 5000 Indikatoren Tabelle 5-3: Bitdefinitionen für Statusbyte B Tabelle 5-4: Bitdefinitionen für Statusbyte C 1.800.561.8187 information@itm.com www. .com...
Page 296: Anhang B
Defender 5000 Indikatoren DE-73 11.2 Anhang B MT-SICS-Befehle 1.800.561.8187 information@itm.com www. .com...
Page 297: Eingeschränkte Garantie
DE-74 Defender 5000 Indikatoren EINGESCHRÄNKTE GARANTIE 1.800.561.8187 information@itm.com www. .com...
Page 298 Indicatori Defender 5000 I T - 1 SOMMARIO 1. INTRODUZIONE............................4 1.1 Precauzioni di Sicurezza 1.1.1 Precauzioni di Sicurezza Opzione Relè 1.2 Panoramica dei Pezzi e dei Controlli 1.3 Funzioni di Controllo 2. INSTALLAZIONE ............................. 9 2.1 Disimballaggio 2.2 Collegamenti Esterni 2.2.1 Base della Bilancia con Connettore 2.2.2 Cavo d'interfaccia RS232 a TD52P 2.2.3 Alimentazione Elettrica CA a TD52P...
Page 299 IT-2 Indicatori Defender 5000 3.5.4 Tracciamento Auto-Zero 3.5.5 Auto-Attenuazione 3.5.6 Salvaschermo 3.5.7 Autospegnimento 3.5.8 Regolare il Contrasto 3.5.9 Reimpostare 3.6 Moduli di Input/Output 3.7 Unità di Pesata 3.7.1 Grammo (g) 3.7.2 Kilogrammo (kg) 3.7.3 Libbra (lb) 3.7.4 Oncia (oz) 3.7.5 Libbra: Oncia (lb: oz) 3.7.6 Tonne (Metric Tonne) 3.7.7 Ton (Short Ton) 3.7.8 Unità...
Page 300 Indicatori Defender 5000 I T - 3 4.2.1 Impostare l’APW (Peso Medio del Pezzo) 4.2.2 Impostazione dell’Applicazione 4.2.3 Accumulo 4.2.4 Impostazione Input/Output (I/O) Verifica 4.3.1 Verifica la Pesata (predefinito) 4.3.2 Verifica il Conteggio 4.3.3 Impostazione dell’Applicazione 4.3.4 Impostazione I/O (Input/Output) Pesata in Percento 4.4.1 Determinazione di un Peso di Riferimento...
Page 301: Introduzione
IT-4 Indicatori Defender 5000 1. INTRODUZIONE 1.1 Precauzioni di Sicurezza 1.1.1 Precauzioni di Sicurezza Opzione Relè CAUZIONE: PERICOLO DI ELETTROCUZIONE. RIMUOVERE TUTTI I COLLEGAMENTI ELETTRICI DALL'INDICATORE PRIMA DI ESEGUIRE ASSISTENZA TECNICA O ESEGUIRE CONNESSIONI INTERNE. L'ALLOGGIAMENTO DEVE ESSERE APERTO EXCLUSIVAMENTE DA PERSONALE AUTORIZZATO E QUALIFICATO COME UN TECNICO ELETTRICO ACCCESO/CANCELLARE SPENTO 1.800.561.8187...
Page 302: Panoramica Dei Pezzi E Dei Controlli
Indicatori Defender 5000 I T - 5 1.2 Panoramica dei Pezzi e dei Controlli TABELLA 1-1 PARTI TD52P Voce Descrizione 1.800.561.8187 information@itm.com www. .com...
Page 303 IT-6 Indicatori Defender 5000 1.2 Panoramica dei Pezzi e dei Controlli (Ripreso.) TABELLA 1-2 PEZZI TD52XW Voce Descrizione 1.800.561.8187 information@itm.com www. .com...
Page 304 Indicatori Defender 5000 I T - 7 1.2 Panoramica dei Pezzi e dei Controlli (Ripreso.) TABELLA 1-3 PANNELLO PC PRINCIPALE Voce Descrizione 1.800.561.8187 information@itm.com www. .com...
Page 305: Funzioni Di Controllo
IT-8 Indicatori Defender 5000 1.3 Funzioni di Controllo Pulsante Azione 1.800.561.8187 information@itm.com www. .com...
Page 306: Installazione
Indicatori Defender 5000 I T - 9 2. INSTALLAZIONE 2.1 Disimballaggio 2.2 Collegamenti Esterni 2.2.1 Base della Bilancia con Connettore 2.2.2 Cavo d'interfaccia RS232 a TD52P Connettore Collegamento 2.2.3 Alimentazione Elettrica CA a TD52P 2.2.4 Alimentazione Elettrica CA a TD52XW 2.2.5 Alimentazione Elettrica alla Batteria 1.800.561.8187 information@itm.com...
Page 307: Collegamenti Interni
IT-10 Indicatori Defender 5000 2.3 Collegamenti Interni 2.3.1 Apertura dell’Alloggiamento CAUZIONE: PERICOLO DI ELETTROCUZIONE. RIMUOVERE TUTTI I COLLEGAMENTI ELETTRICI ALL'INDICATORE PRIMA DI ESEGUIRE ASSISTENZA TECNICA O ESEGUIRE CONNESSIONI INTERNE. L'ALLOGGIAMENTO DEVE ESSERE APERTO EXCLUSIVAMENTE DA PERSONALE AUTORIZZATO E QUALIFICATO COME UN TECNICO ELETTRICO TD52P TD52XW 2.3.2 Base della bilancia senza connettore...
Page 308 Indicatori Defender 5000 IT-11 Collegamenti Cablaggio della Scheda Principale Collegamenti ponticello Excitation Sense Excitation Sense 1.800.561.8187 information@itm.com www. .com...
Page 309: Cavo D'interfaccia Rs232 A Td52Xw
IT-12 Indicatori Defender 5000 2.3.3 Cavo d’Interfaccia RS232 a TD52XW 2.3.4 Installazione della Scheda MICRO SD 1.800.561.8187 information@itm.com www. .com...
Page 310: Orientamento Dell'alloggiamento Posteriore Td52Xw
Indicatori Defender 5000 IT-13 2.4 Orientamento dell'Alloggiamento Posteriore TD52XW 2.5 Staffa di Montaggio 1.800.561.8187 information@itm.com www. .com...
Page 311: Impostazioni
IT-14 Indicatori Defender 5000 3. IMPOSTAZIONI 3.1 Struttura del Menu TABELLA 3-1 STRUTTURA DEL MENU Modalità di Taratura Impostazione Lettura applicazione Volume Beep Prossima Transazione GMP (Buone Unità Pratiche di Comunicazione Fabbricazione) 1.800.561.8187 information@itm.com www. .com...
Page 312 Indicatori Defender 5000 IT-15 GMP (Buone Unità Pratiche di Comunicazione Fabbricazione) 1.800.561.8187 information@itm.com www. .com...
Page 313: Navigazione Nel Menu
IT-16 Indicatori Defender 5000 GMP (Buone Unità Pratiche di Comunicazione Fabbricazione) Tasto di blocco Scheda SD Manutenzione NOTA: 3.2 Navigazione nel Menu Variare le Impostazioni 1. Inviare il Menu 2. Selezionare il Sottomenu 3. Selezionare la Voce Sottomenu 1.800.561.8187 information@itm.com www.
Page 314: Menu Di Taratura
Indicatori Defender 5000 IT-17 4. Selezionare l’Impostazione 3.3 Menu di Taratura NOTE: 3.3.1 Taratura dello Zero Procedure di taratura. 1.800.561.8187 information@itm.com www. .com...
Page 315: Taratura Di Portata
IT-18 Indicatori Defender 5000 3.3.2 Taratura di Portata Nota: Procedure di Taratura: 1.800.561.8187 information@itm.com www. .com...
Page 316: Taratura Di Linearità
Indicatori Defender 5000 IT-19 3.3.3 Taratura di Linearità Procedure di Taratura: 1.800.561.8187 information@itm.com www. .com...
Page 317: Regolazione Geo
IT-20 Indicatori Defender 5000 3.3.4 Regolazione GEO Nota: 3.4 Menu d’Impostazione grassetto Impostazione Opzioni Unità di Capacità Gamma Singolo >|1|< Capacità >|1|< Graduazione >|2|< Capacità >|2|< Graduazione inglese Lingua Energia Elettrica Accesa su Zero Accesa Energia Elettrica Accesa su Unità Auto Tasto Beep (Segnalatore Acustico) Acceso...
Page 318: Unità Di Capacità
Indicatori Defender 5000 IT-21 3.4.1 Unità di Capacità 3.4.2 Gamma Singolo Duplice 3.4.3 Capacità Singolo Duplice Duplice Singolo 3.4.4 Graduazione Singolo Duplice Duplice Singola NOTA: 3.4.5 Lingua 1.800.561.8187 information@itm.com www. .com...
Page 319: Alimentazione Elettrica Per Accensione Dello Zero
IT-22 Indicatori Defender 5000 inglese 3.4.6 Alimentazione Elettrica per Accensione dello Zero 3.4.7 Alimentazione Elettrica per Accensione dell’Unità Automatico 3.4.8 Tasto Beep (Segnalatore Acustico) Acceso 3.4.9 Contatore Transazioni Acceso NOTA: 3.4.9.1 Prossima Transazione 3.4.10 Reimpostare NOTA: 3.5 Menu di Lettura grassetto.
Page 320: Stabilità
Indicatori Defender 5000 IT-23 Lettura Opzioni Stabilità Gamma Zero 100% Livello del Filtro Medio Tracciamento dell’Auto Zero 0,5d Retroilluminazione 1min Salvaschermo 5min Auto-Spegnimento Spento Regolare il Contrasto Reimpostare 3.5.1 Stabilità 3.5.2 Gamma Zero 100% NOTA: 3.5.3 Livello del Filtro Medio 3.5.4 Tracciamento Auto-Zero 0,5 divisioni 3.5.5 Auto-Attenuazione...
Page 321: Salvaschermo
IT-24 Indicatori Defender 5000 3.5.6 Salvaschermo 5 min 3.5.7 Autospegnimento Spento 3.5.8 Regolare il Contrasto 3.5.9 Reimpostare NOTA: 3.6 Moduli di Input/Output Abilitare Reimpostare 1.800.561.8187 information@itm.com www. .com...
Page 322: Unità Di Pesata
Indicatori Defender 5000 IT-25 Modalità di Applicazione & Opzioni Modulo Input/Output Acceso Spento Spento Pesata Spento Spento Spento Spento Acceso Spento Spento Conteggio Spento Spento Spento Spento Acceso Spento Spento Spento Verifica Spento Spento Spento Percento Spento Spento Dinamico Spento Spento Spento Spento...
Page 323: Grammo (G)
IT-26 Indicatori Defender 5000 3.7.1 Grammo (g) 3.7.2 Kilogrammo (kg) 3.7.3 Libbra (lb) 3.7.4 Oncia (oz) 3.7.5 Libbra: Oncia (lb: oz) 3.7.6 Tonne (Metric Tonne) 3.7.7 Ton (Short Ton) Spento 3.7.8 Unità Personalizzata (c) Fattore Esponente LSD (Cifra Meno Significativa) 1.800.561.8187 information@itm.com www.
Page 324: Menu Glp/Gmp
Indicatori Defender 5000 IT-27 Nota: Spento 3.8 Menu GLP/GMP 3.8.1 Formattazione della Data 3.8.2 Data 3.8.3 Formattazione delle Ore 3.8.4 Orario 3.8.5 ID Progetto 3.8.6 ID Bilancia 3.8.7 Reimpostare 1.800.561.8187 information@itm.com www. .com...
Page 325: Comunicazione
IT-28 Indicatori Defender 5000 3.9 Comunicazione grassetto 3.9.1 RS232/2ndo Configurazione RS232 Comunicazione Opzioni (in grassetto sono predefiniti) 9.600 8 Nessuno 1 bit Nessuno Richiesta Solamente Spento, Acceso(Forza LFT (Legale Stabile per il Commercio)Acceso) Automatico Acceso su Stabile RS232/2 Modalità Caricare, Caricare e Zero RS232 Automatico Acceso su Accettare Intervallo...
Page 326: Impostazione Stampa Del Rs232/2Ndo Rs232
Indicatori Defender 5000 IT-29 8 NESSUNO = 8 dati bit, alcuna parità 3.9.1.3 Stop Bit 1 BIT 3.9.1.4 Eseguire Handshake (Stretta di Mano) NESSUNO = alcun eseguire Handshake 3.9.1.5 Controllo Alternato di Stampa 3.9.1.6 Controllo Alternato di Taratura 3.9.1.7 Controllo Alternato dello Zero 3.9.1.8 Reimpostare 3.9.2 Impostazione Stampa del RS232/2ndo RS232 3.9.2.1 Demand (Richiesta)
Page 327 IT-30 Indicatori Defender 5000 3.9.2.5 MT-Continuo MT-Continuo MT-Continuo Nota: MT-Continuo Somma di controllo Off = disattivato 3.9.2.6 OH-Continuo OH-Continuo OH-Continuo Nota: OH-Continuo 3.9.2.7 SICS SPENTO Nota: SICS 3.9.2.8 Bilancia di Riferimento SPENTO Nota: 3.9.2.9 Selezionare Modello Semplice 3.9.2.10 Redigere Modello 1.800.561.8187 information@itm.com www.
Page 328: Configurazione Rs485
Indicatori Defender 5000 IT-31 3.9.2.11 Redigere la Stringa OHAUS 3.9.2.12 Reimpostare 3.9.3 Configurazione RS485 Interfaccia RS232/RS485/USB nel Manuale di ® Istruzioni del Defender 5000. 3.9.4 Configurazione Ethernet Ethernet nel Manuale di Istruzioni Interfaccia del ® Defender 5000 3.9.5 Configurazione Wi-Fi ®...
Page 329: Configurazione Bluetooth
IT-32 Indicatori Defender 5000 3.9.6 Configurazione Bluetooth ® nel Manuale di Istruzioni Host del Defender 5000 Nota: 3.9.7 Configurazione Analogico nel Manuale di Istruzioni Kit Analogico del ® Defender 5000 3.10 Configurazione di manutenzione 3.11 Configurazione tasti di blocco Articolo Impostazioni disponibili (il grassetto è...
Page 330: Pesata
Indicatori Defender 5000 IT-33 4.1 Pesata Pesata Taratura Zero 4.1.1 Impostazione dell’Applicazione Configurazione Configurazione Le Configurazioni della Pesata vengono definite in seguito grassetto Voce Impostazioni Disponibile Commenti Spento Spento 4.1.2 Auto-Taratura 4.1.3 Accumulo 1.800.561.8187 information@itm.com www. .com...
Page 331 IT-34 Indicatori Defender 5000 Accumulare Manuale Automatico Visualizzare i Risultati dell’Accumulo Risultato dell’Accumulare Stampare 4.1.4 ID Input 4.1.5 Impostazione I/O (Input/Output) Grassetto Voce Disponibile Impostazioni Acceso, Spento, Spento, Spento, Spento Spento Spento, 1.800.561.8187 information@itm.com www. .com...
Page 332: Impostare L'apw (Peso Medio Del Pezzo)
Indicatori Defender 5000 IT-35 Nota: Modalità di Applicazione Pesata 4.2 Conteggio Conteggio 4.2.1 Impostare l’APW (Peso Medio del Pezzo) Nota: Metodo 1 1.800.561.8187 information@itm.com www. .com...
Page 333 IT-36 Indicatori Defender 5000 Metodo 2 Metodo 1 Metodo 2 1.800.561.8187 information@itm.com www. .com...
Page 334: Impostazione Dell'applicazione
Indicatori Defender 5000 IT-37 4.2.2 Impostazione dell’Applicazione Configurazione Configurazione 1.800.561.8187 information@itm.com www. .com...
Page 335: Accumulo
IT-38 Indicatori Defender 5000 Grassetto Grassetto Spento/ Spento Spento Spento Acceso Acceso Acceso Acceso Acceso Acceso Acceso 4.2.3 Accumulo 4.2.4 Impostazione Input/Output (I/O) Grassetto). Voce Impostazioni Disponibili Spento, Spento, Spento, Spento, Spento, Spento, Nota: 1.800.561.8187 information@itm.com www. .com...
Page 336: Verifica
Indicatori Defender 5000 IT-39 Modalità Applicazione. Conteggio 4.3 Verifica Verifica Modalità di Verifica 4.3.1 Verifica la Pesata (predefinito) Verifica Verifica la Pesata Sotto/Accettare/Sopra Definire i Limiti Sopra/Sotto Redigere il Limite 1.800.561.8187 information@itm.com www. .com...
Page 337: Verifica Il Conteggio
IT-40 Indicatori Defender 5000 Grassetto grassetto Verificare Pesata Verificare Modalità di pesata Spento/ Spento Spento Spento Spento/ Spento 4.3.2 Verifica il Conteggio Sotto/Accettare/Sopra Impostare l’APW (Peso Medio del Pezzo) Nota: Definire i limiti di Sopra/Sotto 1.800.561.8187 information@itm.com www. .com...
Page 338: Impostazione Dell'applicazione
Indicatori Defender 5000 IT-41 Redigere il Limite Nota: 4.3.3 Impostazione dell’Applicazione Impostazione della Configurazione Menu Configurazione 1.800.561.8187 information@itm.com www. .com...
Page 339: Impostazione I/O (Input/Output)
IT-42 Indicatori Defender 5000 Grassetto grassetto Pesata Pesata: Spento/ Spento Spento Spento Accettare Accettare /Acceso Acceso /Acceso Acceso /Acceso Acceso 4.3.4 Impostazione I/O (Input/Output) Grassetto Voce Impostazioni Disponibili Acceso, Spento, Spento, Spento, Spento Spento Spento, 1.800.561.8187 information@itm.com www. .com...
Page 340: Pesata In Percento
Indicatori Defender 5000 IT-43 Nota: Modalità di Applicazione Verifica Verifica 4.4 Pesata in Percento Percento 4.4.1 Determinazione di un Peso di Riferimento Metodo 1 1.800.561.8187 information@itm.com www. .com...
Page 341: Impostazione Dell'applicazione
IT-44 Indicatori Defender 5000 Metodo 2 Metodo 3 4.4.2 Impostazione dell’Applicazione Configurazione 1.800.561.8187 information@itm.com www. .com...
Page 342: Impostazione Degli Input/Output (I/O)
Indicatori Defender 5000 IT-45 Le Configurazioni in Percento vengono definite in seguito Grassetto grassetto Spento/ Spento Spento Spento 4.4.3 Impostazione degli Input/Output (I/O) Grassetto). Voce Impostazioni Disponibili Acceso, Nota: Modalità di Applicazione Percento 1.800.561.8187 information@itm.com www. .com...
Page 343: Pesata Dinamica
IT-46 Indicatori Defender 5000 4.5 Pesata Dinamica Manuale Semi-Automatico Automatico Dinamico 4.5.1 Impostazione dell’Applicazione Menu Configurazione 1.800.561.8187 information@itm.com www. .com...
Page 344 Indicatori Defender 5000 IT-47 Le Configurazioni Dinamiche vengono definite in seguito Grassetto grassetto Conto alla Conto alla rovescia: rovescia Manuale Manuale: Semiautomatico: Automatico: Nota: 3.000 (con unità corrente) Se il tipo di funzione dovesse essere Spento/ Spento: 1.800.561.8187 information@itm.com www. .com...
Page 345: Impostazione Del Tempo Medio
IT-48 Indicatori Defender 5000 Spento Spento: Manuale: Automatico: Nota: 4.5.2 Impostazione del Tempo Medio Nota: Metodo 1 Dinamico 1.800.561.8187 information@itm.com www. .com...
Page 346: Impostazione Input/Output (I/O)
Indicatori Defender 5000 IT-49 Metodo 2 4.5.3 Impostazione Input/Output (I/O) Grassetto). Voce Impostazioni Disponibili Acceso, Spento, Spento, Spento, Spento, Spento, Spento, Nota: Modalità Applicazione Dinamico 1.800.561.8187 information@itm.com www. .com...
Page 347: Comunicazione Seriale
IT-50 Indicatori Defender 5000 5. COMUNICAZIONE SERIALE 5.1 Controllo d’Interfaccia Controlli OHAUS 1.800.561.8187 information@itm.com www. .com...
Page 348: Interfaccia Rs232
Indicatori Defender 5000 IT-51 5.2 Interfaccia RS232 Connettore Connettore Connettore Connettore Connettore 5.3 Collegamento a un Computer 5.4 Collegamento a una Stampante Seriale 5.5 Stampati Verificare l’applicazione di pesata: Campo Lunghezza Non-Verifica l’applicazione di pesata: Campo Lunghezza 1.800.561.8187 information@itm.com www. .com...
Page 349: Esempi Di Stampati
IT-52 Indicatori Defender 5000 Peso Unità Stabilità T/N/G/PT Lo Stato dell’applicazione (per la Verifica) Carattere(i) di termine 5.6 Esempi di Stampati Impostazione in Menu Stampare 6. SCHEDA MICRO SD Scheda SD Opzioni( 1.800.561.8187 information@itm.com www. .com...
Page 350: Libreria
Indicatori Defender 5000 IT-53 Biblioteca Abilitare Memoria RS232 Utente Note: 6.1 Libreria Nome dei File e dell’Annuario Nome dei File Annuario Pesata Libreria Conteggio Verifica Voci della Libreria 1.800.561.8187 information@itm.com www. .com...
Page 351 IT-54 Indicatori Defender 5000 * Solo la libreria Checkcounting ha il valore APW. Visualizzazione della Biblioteca Inviare Libreria Libreria Creare una nuova libreria Cercare la Libreria 1.800.561.8187 information@itm.com www. .com...
Page 352 Indicatori Defender 5000 IT-55 Nota: Richiamare la Libreria Uscire dalla biblioteca 1.800.561.8187 information@itm.com www. .com...
Page 353: Utente
IT-56 Indicatori Defender 5000 6.2 Utente Login utente Profilo utente Annuario Utente Inviare Profilo Utente Aggiungere un nuovo utente 1.800.561.8187 information@itm.com www. .com...
Page 354 Indicatori Defender 5000 IT-57 Cercare un Utente Modifica e cancella un utente 1.800.561.8187 information@itm.com www. .com...
Page 355: Alibi
IT-58 Indicatori Defender 5000 Autorità di vigilanza Regola password 6.3 Alibi la scheda SD non è installata Acceso Alibi Memoria Registro 1.800.561.8187 information@itm.com www. .com...
Page 356: Modificabile
Indicatori Defender 5000 IT-59 6.4 Modificabile Modificabile “Link to Collegarsi a RS232 RS232 1.800.561.8187 information@itm.com www. .com...
Page 357: Legale Per Il Commercio
IT-60 Indicatori Defender 5000 7. LEGALE PER IL COMMERCIO 7.1 Impostazioni 7.2 Verifica 1.800.561.8187 information@itm.com www. .com...
Page 358: Sigillatura
Indicatori Defender 5000 IT-61 7.3 Sigillatura 8. MANUTENZIONE AVVERTIMENTO: DISCONNETERE L’UNITÀ DALL’ALIMENTAZIONE ELETTRICA PRIMA DI ESEGUIRE LA PULIZIA 8.1 Modello di Pulizia T52P 8.2 Modello di Pulizia TD52XW 1.800.561.8187 information@itm.com www. .com...
Page 359: Risoluzione Dei Problemi
IT-62 Indicatori Defender 5000 8.3 Risoluzione dei Problemi TABELLA 8-1 RISOLUZIONE DEI PROBLEMI SINTOMO PROBABILE CAUSA(E) RIMEDIO 1.800.561.8187 information@itm.com www. .com...
Page 360: Dati Tecnici
Indicatori Defender 5000 IT-63 9. DATI TECNICI 9.1 Specifiche Materiali Condizioni ambientali TABELLA 9-1 SPECIFICHE 1.800.561.8187 information@itm.com www. .com...
Page 361: Accessori E Opzioni
IT-64 Indicatori Defender 5000 9.2 Accessori e Opzioni TABELLA 9-2 OPZIONI Descrizione 1.800.561.8187 information@itm.com www. .com...
Page 362: Disegni E Dimensioni
Indicatori Defender 5000 IT-65 9.3 Disegni e Dimensioni 1.800.561.8187 information@itm.com www. .com...
Page 363: Tabella Dei Valori Geografici
IT-66 Indicatori Defender 5000 9.4 Tabella dei Valori Geografici TABELLA 9-4 CODICI GEOGRAFICI Elevation in meters 1300 1625 1950 2275 2600 2925 3250 1300 1625 1950 2275 2600 2925 3250 3575 Elevation in feet 1060 2130 3200 4260 5330 6400 7460 8530 9600...
Page 364: Conformità
Indicatori Defender 5000 IT-67 10. CONFORMITÀ Avviso importante per gli strumenti di pesata verificati nell'UE Nota FCC (Commission Fédérale sur les Communications (Commissione Federale sulle Comunicazioni)) Nota dell’Industry Canada (Industria canadese) Registrazione ISO 9001 1.800.561.8187 information@itm.com www. .com...
Page 365 IT-68 Indicatori Defender 5000 Smaltimento dei Rifiuti 1.800.561.8187 information@itm.com www. .com...
Page 366: Appendici
Indicatori Defender 5000 IT-69 11 APPENDICI 11.1 Appendice A Uscita continua standard : Formato uscita continua standard Note sul formato uscita continua: Tabella 5-2: Definizioni del byte di stato A 1.800.561.8187 information@itm.com www. .com...
Page 367 IT-70 Indicatori Defender 5000 Tabella 5-3: Definizioni bit del byte di stato B Tabella 5-4: Definizioni bit del byte di stato C 1.800.561.8187 information@itm.com www. .com...
Page 368: Appendice B
Indicatori Defender 5000 IT-71 11.2 Appendice B MT- Controlli SICS 1.800.561.8187 information@itm.com www. .com...
Page 369 IT-72 Indicatori Defender 5000 GARANZIA LIMITATA 1.800.561.8187 information@itm.com www. .com...

Ce manuel est également adapté pour:

Defender td52xw Defender td52p

OHAUS Defender 5000 Serie Manuel D'instructions

English

Español

Liens rapides

Chapitres

Dépannage

Manuels Connexes pour OHAUS Defender 5000 Serie

Sommaire des Matières pour OHAUS Defender 5000 Serie