Id Input; Input/Output (I/O) Setup - OHAUS Defender 5000 TD52P Mode D'emploi

EN-36
a. Gross weight and Net weight cannot be
accumulated at the same time – only Gross
weight or Net Weight can be accumulated;
b. After a weighment, the Gross weight on the pan
has to reach 0 before a new sample can be
accumulated.
Note: The Accumulation icon
shown if Accumulate is set to Manual and
Automatic (see section 4.1.1).
Viewing the Accumulation Results
To view the accumulation results, press the
Softkey corresponding to the icon
The Accumulate Result screen is displayed.
To clear the accumulation results, press the button
.
When the instructional message "Clear the
statistical data?" appears, press the Softkey
corresponding to the icon
To return to home screen press the Softkey
corresponding to the icon
Press the button Print to print Accumulation result.

4.1.4 ID Input

Press Softkey corresponding to the icon
enter configuration screen.
User can press alphanumeric keys to input the ID
number. Then press the Softkey corresponding to
the icon to confirm the input.

4.1.5 Input/Output (I/O) Setup

The I/O's setup can be customized for various user preferences.
The I/O's setup is defined below (defaults in Bold).
Item
Enable
Discrete Input 1
Discrete Input 2
Discrete Output 1
will only be
.
.
.
Available Settings
On, Off
Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Off, Overload, Underload
to
Defender 5000 Indicators