Installing The Appliance - Atlantic Tatou Notice D'utilisation Et D'installation

The appliance you have just purchased has been subjected to numerous tests and checks in order to ensure its
quality.We thank you for your choice and your confidence in our products and hope your machine will provide you
with complete satisfaction.
Some advice:
Read the instructions carefully before starting to use your machine.
Shut off the current before the connection of the machine and check the supply voltage.
Keep these instructions even after you have installed your machine.
The machine's characteristics
CAT B or C : Machine meeting the requirements of the NF Standard: "Electrical Performance"
for the indicated category.
IP24 : Machine protected against water splashes.
Class II : Double insulated.
1) Where to install the appliance ?
- These appliance is designed for installation in domestic pre-
mises. In any other case, please consult your local distri-
butor.
- He must be installed in accordance with normal trade
practices and the regulations in force in the country in
which he is being installed.
- Observe the minimum distances from any obstacles when
positioning the appliance.
- If there is any facing material in the wall laid over insulation
material, a wedge must be placed under the appliance's sup-
port bracket of equal thickness to that of the insulation to
preserve the necessary free space behind the appliance so as
not to interfire with its control systems.
Do not install the appliance:
In a draught likely to interfere with its
contr ol systems (under a Centrall y
Controlled Fan, etc).
Under a fixed electrical socket.
In the volume 1 of the bathrooms.
In the volume 2 if the appliance's controls are
able to be operated by someone using the shower or the bath.
We strongly advise against installing vertical machines above an altitude of 1000m
(risk of faulty operation).
Installing a machine at altitude causes an increase in air output temperature
(of the order of 10°C per 1000m above sea level).
It is forbidden to install a vertical machine horizontally or vice versa.
(shown on the machine's information label):
I
NSTALLING THE APPLIANCE
Volume
3
Volume
2
Volume
1