Installation; Preparing The Installation Of The Appliance; Installation Rules - Atlantic ACCESSIO DIGITAL 2 Notice D'utilisation Et D'installation

PREPARING THE INSTALLATION OF THE APPLIANCE

Installation Rules

-
This appliance has been designed for a residential installation. In any
other case, please see your distributor.
-
The installation must be carried out in accordance with normal trade
practices and applicable standards in the country of installation (NFC
15-100 for France).
-
The appliance must be powered with single phase 230 V 50 Hz.
-
In humid areas such as bathrooms and kitchens, the power socket
must be installed at 25 cm (9.8") minimum above the floor.
Keep the appliance away from any air draught which may
disrupt its functioning (e.g. under a mechanical or centralized ventila-
tion, etc.).
Do not install under a fixed power socket.
Despite all the care taken during the various manufacturing steps, some
oil traces may appear on the cardboard or the product upon unpac-
king. These traces come from the manufacture of the appliance and do
not interfere in any way with its good functioning. Simply wipe off any
traces of oil with absorbent paper

Installation

50
25
50
25
12
Volume 1 No electrical appliances
Electrical appliance IPX4
(Standard EN 60335-
Volume 2
2-43: 2003/A2: 2008)
Observe the minimum distances with
furniture for the location of the ap-
pliance
27
EN