Restrictions; Load-Shedding - Atlantic ACCESSIO DIGITAL 2 Notice D'utilisation Et D'installation

Information about the appliance's power.
Appliance identi cation.
Version identi cation.

Restrictions

You can restrict access to the temperature settings.
In the Basic or Prog mode menus, go to Settings . Choose «Restricted».
-The temperature will be blocked at 23° C maximum;
-An alert signal will appear if the temperature is increased with a confirmation request
(compulsive anti-heating function);
-Access is secured through a PIN in the Expert Menu.
Disabling is possible by resetting the appliance. (Please refer to the Expert Menu).

Load-shedding

Our appliances are compatible with different load-shedding systems. However, you should
not use load-shedding by cutting off the power supply because this is incompatible with our
appliances. Total and repeated power supply cut off may cause premature wear and damage
to electronic cards that are not covered by the manufacturer's warranty. During load-shed-
ding periods, the screen switches to standby mode.
The unit then returns to its initial operating mode.
40