GIERRE BAKETEK Serie Instructions Pour L'installation, L'utilisation Et La Maintenance page 56

GB
Cooking chamber heating elements
• Work from the rear side of the oven to disconnect electric connections of heating elements
• Remove the rack supports
heating elements.
• Unscrew the screws
• eplace the heating elements and refit all parts in reverse order. Remember to replace the silicon where R
necessary ( use only up to 300° C resistant silicon).
Thermometer (BAKETEK...)
Proceed as follows:
• open the oven left side;
• unscrew the thermometer nuts (
• replace it with the new one, put the bulb back in the cooking chamber and screw in the nuts.
A
A
(A- Fig.17)
(B-Fig.22) which fasten the heating elements flange to the cooking chamber.
A
Fig. 22
A- Fig. 3 2
and fan cover-grid
B
) and remove the bulb entering the cooking chamber;
Fig. 23
56
(B- Fig. 17) to reach cooking chamber
(A-Fig.22) .
B