GIERRE BAKETEK Serie Instructions Pour L'installation, L'utilisation Et La Maintenance page 53

Door glass (BAKETEK 16...)
To replace the glass door it is necessary remove the hood:
• open the oven left side panel;
• unscrew the two screws on the top front side
• unscrew the screws on the top rear
• if necessary, remove the rod butterfly valve steam and
unscrew the screws under the top of the control panel
15) .
Internal glass:
• after removing the hood, disconnected the wires from the
upper hinge of the door;
• unscrew the upper hinge, remove the door for maneuver in
the most convenient and unscrew the screws
• detach the two parts of the door
• remove the seal on the door piece
• under the seal seat are placed screws that must be removed
to extract the internal glass;
External glass:
• after removing the hood, disconnected the wires from the
upper hinge of the door;
• unscrew the upper hinge, remove the door and unscrew the
screws (A-Fig. 16)
• detach the two parts of the door
• unscrew the last screws visible on the dor
• remove the external glass.
(B-Fig. 15)
(B-Fig.16)
(C-Fig. 16)
;
(B-Fig.16)
(A-Fig. 15) ;
;
(C-Fig.
C
(A-Fig. 16) ;
;
;
C
;
(D-Fig. 16) ;
53
Fig. 15
Fig. 16
D
GB
B
A
A
B