Pluming And Vents - GIERRE BAKETEK Serie Instructions Pour L'installation, L'utilisation Et La Maintenance

GB
2.3 Plumbing and vents
Connect the water supply pipe to the ¾" G inlet, screwing on the coupling (
a suitable mechanical filter and a shutoff cock.
To work properly, , the oven requires drinking water with a maximum hardness of 3°F to prevent scaling
inside the cooking chamber.
Where necessary, install an appropriate water softener on the water circuit's supply line. Permanently
connect the appliance to the water distribution system. Do not use a set of separable couplings.
The admitted supply pressure range is min. 150 kPa ( 1,5 bar), max 400 kPa (4 bar).
Vents
The vents (B-Fig.8)
B
B
A
Fig. 7
must be kept free; it cannot be blocked.
Figura 8
46
A - Fig. 7 ). Fit the circuit with
MEGA...
BAKETEK...