Additional Information; Specifications - Sony HT-S200F Manuel D'instructions

Additional Information

Specifications

Amplifier section
U.S. models:
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R:
With 4 ohms loads, both channels
driven, from 200 - 20,000 Hz; rated
15 W per channel minimum RMS
power, with no more than 1% total
harmonic distortion from 250 mW to
rated output.
POWER OUTPUT (reference)
Front L/Front R speaker: 25 W (per
channel at 4 ohms, 1 kHz)
Subwoofer: 30 W (at 4 ohms, 100 Hz)
Canadian models:
POWER OUTPUT (rated)
Front L + Front R: 20 W + 20 W (at
4 ohms, 1 kHz, 1% THD)
POWER OUTPUT (reference)
Front L/Front R speaker: 25 W (per
channel at 4 ohms, 1 kHz)
Subwoofer: 30 W (at 4 ohms, 100 Hz)
Inputs
TV IN (OPTICAL)
USB
Outputs
HDMI OUT (TV (ARC))
USB section
(USB) port:
Type A (For connecting USB memory)
BLUETOOTH section
Communication system
BLUETOOTH Specification version 4.2
Output
BLUETOOTH Specification Power
Class 1
Maximum communication range
Line of sight approx. 25 m
Frequency band
Modulation method
Compatible BLUETOOTH profiles
Supported Codec
Transmission range (A2DP)
1)
2)
3)
4)
Speaker section
Speaker system
Speaker
General
Power requirements
Power consumption
1)
2.4 GHz band (2.4000 GHz -
2.4835 GHz)
FHSS (Freq Hopping Spread Spectrum)
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote Control
Profile)
3)
4)
SBC
20 Hz - 20,000 Hz (Sampling frequency
32 kHz, 44.1 kHz, 48 kHz)
The actual range will vary depending on
factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone use, reception
sensitivity, the operating system,
software applications, etc.
BLUETOOTH standard profiles indicate
the purpose of BLUETOOTH
communication between devices.
Codec: Audio signal compression and
conversion format
Abbreviation for Subband Codec
2-Way 3 Drivers Speaker System, Bass
reflex
Front L/Front R speaker: 46 mm (1 13/
16 in) cone type
Subwoofer: 70 mm (2 7/8 in) cone type
DC 19.5 V (using the supplied AC
adapter connected to AC 100 V - 240 V,
50 Hz/60Hz power supply)
On: 25 W
Standby mode: 0.5 W or less (Power
Saving mode)
(When Control for HDMI function and
BLUETOOTH Standby mode are set to
off)
Standby mode: 2 W or less*
2)
35
US