Notes On Hdmi Connections; Saving Power Consumption; Saving Power In Standby Mode - Sony HT-S200F Manuel D'instructions

Notes on HDMI
Connections
• Use an HDMI-authorized cable.
• We recommend using a Sony High
Speed HDMI Cable with Ethernet with
the Cable Type Logo.
• We do not recommend using an
HDMI-DVI conversion cable.
• Audio signals (sampling frequency, bit
length, etc.) transmitted from an HDMI
jack may be suppressed by the
connected device.
Saving Power
Consumption
To use the system while saving power
consumption, change the following
settings.
Turn the System Off by
Detecting the Using State
When you set the auto standby function
to on, the system enters standby mode
automatically when you do not operate
the system for about 20 minutes and
the system is not receiving an input
signal.
Press and hold CINEMA for 5 seconds
to set the function to on or off.
Auto standby on
The USB indicator flashes twice.
Auto standby off
The USB indicator flashes once.
Saving Power in Standby
Mode
To save power consumption during the
standby mode, set the BLUETOOTH
standby mode (page 26) and Control for
HDMI function (page 27) to off.
The default settings for them are on.
29
US