Making Sound With Low Volume Easy To Hear By Compressing Dynamic Range; Enjoying Multiplex Broadcast Sound (Audio) - Sony HT-S200F Manuel D'instructions

Masquer les pouces Voir aussi pour HT-S200F:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Making Sound with Low
Volume Easy to Hear by
Compressing Dynamic
Range
This function works only when playing
the Dolby Digital signal of the device
that is connected to the TV IN
(OPTICAL)/HDMI OUT (TV (ARC)) jack.
When you set Dolby DRC (Dynamic
Range Control) to on, dynamic range of
the audio signal (range between the
maximum and minimum volume) is
compressed and sound with low
volume is easy to hear.
Press and hold AUDIO for 5 seconds to
set the function to on or off.
Dolby DRC on
The USB indicator flashes twice.
Dolby DRC off
The USB indicator flashes once.
Enjoying Multiplex
Broadcast Sound (AUDIO)
You can enjoy multiplex broadcast
sound when the system receives a
Dolby Digital multiplex broadcast signal.
Press AUDIO repeatedly.
The channel changes cyclically as
follows.
Main
Sub
Main/Sub
Main
Outputs only the main channel.
The TV indicator flashes once.
Sub
Outputs only the sub channel.
The USB indicator flashes once.
Main/Sub
Main sound is output from the left speaker
and sub sound is output from the right
speaker.
The TV and USB indicators flash once.
Note
To receive a Dolby Digital signal, you need
to connect a TV or other devices to the TV
IN (OPTICAL) jack with the optical digital
cable (supplied) or the HDMI OUT (TV
(ARC)) jack with an HDMI cable (not
supplied).
Adjusting the Volume for the
Connected Device
Automatically
You can adjust the volume
automatically depending on the input
signal or content from a connected
device by setting the auto volume
function to on.
Press and hold MUSIC for 5 seconds to
set the function to on or off.
Auto volume function on
The USB indicator flashes twice.
Auto volume function off
The USB indicator flashes once.
Adjusting the Level of the
Bass Tone
Press BASS repeatedly.
The level of the bass tone changes
cyclically as follows.
0
+1
0
-1
0 (Normal)
The TV and BLUETOOTH indicators flash
once.
+1 (Strong)
All the indicators flash once.
-1 (Light)
The TV indicator flashes once.
Note
When the input source does not contain
much bass sound, such as in TV programs,
the bass sound from the subwoofer may
be difficult to hear.
0...
23
US

Publicité

Table des Matières
loading

Table des Matières